thedave
-
Posts
17 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by thedave
-
-
Keep in mind at that 48 Hz. point, the speakers’ output is down by probably 4 dB, so you’ll want to set the sub’s hi-cut point somewhat higher than that, so you don’t have a dip at the crossover point. In the same way, the sub’s hi-cut control rolls off the sub’s top frequency response, but it’s not like a “brick wall” cutoff, so it will be tapering off on its high end the same way the speakers will be rolling off on their low end.
All that to say that you want some overlap between the sub and the speakers. Ideally, you could get a sound pressure level (SPL) meter and a test CD to get really exact, but your ears can likely get you at least halfway there. Adjust the control until it sounds right. The sub should be audible, but it shouldn’t speak any louder than the speakers. If you play a tune with lots of bass notes running up and down, the volume level on each note should be similar. There shouldn’t be any notes that sound softer than others, nor should there be any bass notes that jump out louder than the rest. To correct for some soft notes, raise the sub’s hi-cut, because you have a dip at the crossover point. For individual notes that jump out louder, lower the hi-cut, because you have a peak. You’re aiming for flat/even frequency response through the low-end range, with sub and speakers working smoothly together.
Congrats on your new speakers, and happy listening!
Great notes, thanks! I'll check out the hi-cut.
Sent from my iPhone using Tapatalk-
2
-
-
Subs do help. My crossover is set at 55 with a slope of 24 dB. SVS SB- 3000. Adjust the volume to what you like and enjoy your Heresy IVs
I am, thanks!
Sent from my iPhone using Tapatalk-
2
-
-
A well implemented subwoofer/s will almost always enhance fidelity when added.
While I think my RB-75s are incredible on their own, when I added my RSW-10d to the mix, they are really tough to beat. Thicker, fuller, punchier, and soundstage improved, noticeably.
I would say start at 80hz and work your way down. You will probably settle at about 60hz if I had to bet on it.
Bill
Good idea. I have an R-10SW that I've enjoyed, I'll play with it.
Sent from my iPhone using Tapatalk -
What are the thoughts around a sub in two-channel audio? I have the Heresy IV - new in!! - and with a bass response down to 48hz, is there any loss of fidelity if I turn on the sub and drop the crossover down to 45-50hz? With my almost complete lack of understanding aside, that shouldn't remove any usable signal from going to the Heresy fronts... Right?
Thanks!
Sent from my iPhone using Tapatalk
-
Actually 3 weeks ago. Bought them from Crutchfield.
[emoji3166]
Crutchfield told me today they had no knowledge of coming stock. I did order walnut. 4 weeks ago. Oh well. ¯\_(ツ)_/¯
Sent from my iPhone using Tapatalk -
I don't live near a certified dealer, but all official online dealers list Heresy IVs as either "Out Of Stock" or even as "Discontinued"... !?
I also noticed that the official Klipsch website doesn't return results for the Heresy IV, but hides it behind an "older products" link! Screenshot: https://cl.flycl.ps/nOu8X6mw
What's going on with Heresy IV stock?
-
Thanks all for taking your time to drop some links and explain a bit. I appreciate it.
Sent from my iPhone using Tapatalk -
On 2/16/2020 at 4:25 PM, dtr20 said:
I said the same thing, but then I witnessed a demo of the same song playing with a typical Staples USB cable and some expensive audioquest USB cables. The audioquest rep explained some technical stuff that I don't remember, but I will say that you could definitely hear an improvement, not sure if it's worth the price tag.
Can someone provide a link to a decent explanation of how this is possible? Digital information over USB cables is not allowed to be lossy. It's not like USB can transfer in some form of local UDP. The exact sequence of 0s and 1s that enters the cable at one end should exit it at the other. I realize the differences in DACs and converting digital one way or the other, but for information transfer...
-
3 hours ago, Randyh said:
- right , having oak floors means the walnut is off with the rest of the decor -The Winmax wipe on poly is hand rubbed ----so you 're just adding a tone to deepen the grain -- where I like it is to add protection to the veneer from drying given UV rays or to avoid scratches and peeling or a hit by an object -
it will add a slight satin finish and not a shine , and it will be a harder surface and a slightly darker appearance with a lot more detail from the grain of the wood veneer --
That's not a terrible idea. If nothing else I'd have it in my back pocket if the oak grain I received underwhelmed me.
Do you mean... Minwax? Having trouble finding Winmax...
-
4 minutes ago, Randyh said:
I added a large picture of distressed oak -------now if these were mine , I would add Winmax -----WIPE ON POLY - this would make them more alive and show the grain -
Think you could do that to a veneer like this? I think I like the deepness of Walnut's grain, that might be where I'm getting caught up here. The idea of deepening the grain via Winmax or whatever hadn't crossed my mind.
-
I'm trying to decide between the Oak and Walnut cabinets in the Heresy IVs. We have oak floors and an oak console, but the stock photos of the oak make it look kind of meh. Has anyone seen them in person? Thanks!
-
45 minutes ago, YK Thom said:
I think there are many considering moving to 3.1 and many already have. Like you we watch fewer movies and those we do (along with TV), sound just fine in 3.1.
Yup. This is where I am.
Hey do you think Klipsch would sell me the lighter grills separately for the walnut cabinets? I know I want the walnut cabinets, and I may like the darker grills, but then I mocked this up, and wow...
-
4 hours ago, ILI said:
If you want a purist sound, I'd unplug all except the Heresy set, and hit the 'Source Direct' button on your Marantz remote and then enjoy them for a couple of weeks like that. It may well be you'll get rid of all that clutter you don't use anymore, and never look back, and have more space to breathe...
One more thing, there are great deals to be found on the Heresy IIIs, which are still great speakers...
Don't think I'm not considering it. I think I may keep my center channel for TV and video, but may remove the surrounds and go 3.1 or even 3.0. I'll miss surround sound once or twice a month, but the part of me that likes to declutter and keep things minimal vastly out-powers the rest of me :)
-
2
-
-
33 minutes ago, Peter P. said:
I say, if you're gonna buy the Heresy's, run them with your home theater receiver and your existing subwoofer (assuming you have one in your system), and cross over the Heresy's at the frequency of your choosing. Otherwise, the R26's already play lower than the Heresy's so you might be disappointed if you play the Heresy's "bare". To the Heresy's advantage, they are 3-way so the midrange horn voicing may be an improvement over your existing towers.
I feel all this talk of "what amp to pair my speakers with" is a giant unicorn-chasing money pit. Run what ya' brung and you'll be happy.
I own Heresy's with a subwoofer and I approve this message.
I do have a sub, but the receiver doesn't use it for 2-channel audio (by default) and I haven't turned it on because of the apartment situation (and the R26s do a fine job of keeping it balanced). I will admit part of the desire for the Heresys is visual (apartment) but I'm hoping they'll fill the room a bit more compared to what feels like a smaller sweet spot on the towers, although that may be more a function of space and setup.
-
41 minutes ago, ILI said:
Buy the Heresys and hook them to your Marantz. Then run Audyssey. Next, trust your ears and start enjoying your setup.
(You also may want to inform your close neighbours...)
;¬)
One of the reasons we live in the building we do is that the walls and ceilings/floors are solid and thick. No thin drywall. We can listen to music well into the night without disturbing the neighbors - although I do keep the sub turned way down.
-
1
-
-
Hi everyone,
First post - I've always had Klipsch and always leaned towards HT, and in that currently in my apartment have a pair of R-26F towers in a 5.1 setup.
I simply don't watch movies much and listen to music a *lot* and was considering finally getting a pair of Heresys - a long-standing dream of mine - and moving toward a 2-channel setup.
The question is... Will I be able to enjoy the Heresys on a modern HT receiver? Most setups I've seen are either running on older high-end gear (like 70's Marantz) or very nice tube-amps for a 2-channel specific setup. While I may be able to upgrade great later, the Heresys will eat up any audio budget for at least a year, and I really don't hate the SR6012 at all.
Any thoughts - even total disbelief - is appreciated. Cheers!
Dave
-
2
-
Question about a sub in 2 channel
in 2-Channel Home Audio
Posted
Yes!! This, all day.
Sent from my iPhone using Tapatalk