The pinout is on the inside of the box on the board at the soldering joints. Id include a pic but i think i have to register for that. Just unscrew it and each soldering joint at each in connector is labeled but just in case I'll read off labels and colors for you....
RED = ncc
Shielded in BLACK - GND
(NOTE: im not sure but by process of elimination this SHOULD be your BLUE wire in the VGA cord supplied with the unit.)
GREEN = "SGND" (and judging from the circuit path im guessing "signal gnd" is coupled with the main PS/overall modulated ground. That is to say its the negative side of your signal. But i cant be sure til i do some testing. Im converting my unit to a standalone speaker tower with a BT reciever so ill let ya know when i get done)
WHITE = "Sub" (+sub signal)
YELLOW = "SAT R" (positive+ right high/mid satellite speakers)
Full Set of Schematic Diagrams for ProMedia 2.1 System !
in Personal Music Systems
Posted
The pinout is on the inside of the box on the board at the soldering joints. Id include a pic but i think i have to register for that. Just unscrew it and each soldering joint at each in connector is labeled but just in case I'll read off labels and colors for you....
RED = ncc
Shielded in BLACK - GND
(NOTE: im not sure but by process of elimination this SHOULD be your BLUE wire in the VGA cord supplied with the unit.)
GREEN = "SGND" (and judging from the circuit path im guessing "signal gnd" is coupled with the main PS/overall modulated ground. That is to say its the negative side of your signal. But i cant be sure til i do some testing. Im converting my unit to a standalone speaker tower with a BT reciever so ill let ya know when i get done)
WHITE = "Sub" (+sub signal)
YELLOW = "SAT R" (positive+ right high/mid satellite speakers)
BLACK = SAT L" (left mid/hi positve signal)