Search the Community
Showing results for tags 'voice coil'.
Found 1 result
If the voice coil is rubbing in your Klipsch woofer, don't throw it out yet. Some folks think it means the voice coil is blown or burnt up. It might just be out of alignment. The easy way to tell is look at the spider and see if it has become unglued from the frame. Here is a video showing a detached spider: I am using a gell type super glue. I had it on the shelf. Slow drying epoxy would work too. Here are some pictures I took as I was doing the repair. Cut the dust cap off, and put a couple thick business cards down into the former. This will center the voice coil, and thereby lign up the spider you are about to glue up. Make a way to get the glue in between the spyder and the frame. Without some modifications, this will never work: I used what I had laying around to get that glue in there. Some stirring sticks, some shrink tubing, and some duck tape. What else does a hillbilly need? I applied some heat to bend the stirring stick. Then I cut it off to make it just the right length. Pretend like the glass isn't there. It was impossible to take a picture with my iphone while operating a lighter and holding a stirring stick. Now I cut it off to just the right length. Continued