smiley

quote: Originally posted by mike stehr: You could probably replace it with another brand capacitor of the same value. 10,000uf 80v is a pretty big value. I'm not sure about Digi-key, But I know Mouser carries computer grade electrolytics in this value. You could get audio-grade caps through someone like Micheal Percy. But the value you want, are forty bucks a pop. (I dought if you want to spend this much.) I assume these are snap-in capacitors? If you are going to replace one, I would go for both. You want to keep them matched. Good luck! THANX! Thanks for the help. I tried finding a dealer for Su'scon (the original) and didn't have luck. Tried the normal places (including Digikey) and most places just don't have caps this big (without being a computer grade). This one is a snap-in electrolytic 35mm x 50mm. Nichicon lists one, trouble is finding a rep to get it - most have minimum quantities and aren't geared up to handle retail customers for onesy-twosy stuff like me... I'll try Mouser and Micheal Percy as you mentioned.

Can anyone tell me the Klipsch BOM P/N for the 10,000uF 80V Su'scon capacitor (one of two on the PCB) on the power supply of a KSW-300 powered sub?