ajsons
-
Posts
543 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by ajsons
-
-
-
-
-
-
-
-
On 10/20/2018 at 8:24 AM, Marvel said:
.
-
1
-
-
-
-
-
-
-
-
-
-
You'll find the rest of the pics in his post.
Very ingenious I say.
https://community.klipsch.com/index.php?/topic/39539-klipschorn-center-channel-mod-finished/?hl=man
-
1
-
-
Here's Qman's system then.
-
2
-
-
Qman did it.
The center channel (at the time) was a Khorn mounted horizontally, exhausting to the ceiling, top hat and tweeter were in front.
I believe he replaced the center channel witha University Dean (he called Classic).
-
1
-
-
Pots, but L-pads or even T-pads will work.
-
The steel box is 7 x 5 x 3, too small in my opinion.
I'll use a larger aluminum box, if I were you, or a different mounting method..
Let me know if you need more details.
Good luck on your Classics!!
(And post more pictures when they get completed).
-
With the controls added. The pots are 50ohm units, I checked them, (I did my OHM WORK).
-
Most of this info is in the Classic thread, but the schematic is added on the lower left corner, for a simple N-3 without brilliance and presence controls.
-
Fanplant,
I replied to your pm, but you haven't responded back.
Good job on that Classic !!! (soon to be a pair). I envy you cause I still have a single unit.
The schematic that Marvel posted has all the info you need to build an N-3 equivalent.
Here's more info though. It may be helpful, maybe not.
The brown cap is a dual-section 30/30 ufd for the woofer, the larger one is the 4.2ufd. The inductor on the left is the .28 mH, and the one on the right is a center-tapped woofer inductor, for a selectable woofer crossover, 350 or 700hz. The caps are jumpered at the terminal board for a parallel connection for 350 hz. I couldn't find my LCR meter, so I can't verify the values of the inductors.
-
Congratulations, Bruce!!!
La Scala Mods
in Technical/Restorations
Posted
.