Paul

im just curious ,But how did you get it setup to sound good with your lascalas,Or do you even know its there..[]

This was not for you Ear it was for getech, I thought he asked for one [*-)],I know you have boxs full of them[]

Ok you wanted a brochure here you go,The front looks nice[]

Ok you wanted a brochure here you go....[]

Ok you wanted a brochure here you go....[]

Well, you apparently didn't understand, address, or answer his question, either. You are completely incorrect in understanding how his (and perhaps some other) subwoofer works. His subwoofer does not have a separate LFE input versus the L+R pre-ins. His subwoofer has a toggle switch that allows him to ENABLE or DISABLE the subwoofer's low-pass filter(variable crossover knob). So he (thxsubwoofer) is correct. Since he is using a receiver with an "LFE" or Sub" output, he should DISABLE the subwoofer's low-pass filter, thereby bypassing the subwoofer's low-pass filter altogether, and letting his receiver do the bass managing with it's own digital crossover. Thats right i forgot the rsw has no lfe input.But the low level inputs can be used as lfe.

HuH? People should take it a little slower on details of hookups to make it less confusing,There are lots of beginners on here that are new to AV/audio,Yes if you have a sub out connection coming out of the back of your receiver that will be a low pass,and this connects to the lfe input of your subwoofer,If you connect the cable from your receiver subout to the high pass of your sub connections, you will be working on a set 80hz settings most common on subs,On most recevers you can adjust your cutoff you like the best,You will also gain a 4 to 18db gain depending on manufacture using a double cable left/right,If you are using a single cable from your sub out from receiver, you can pug it in to your sub left or right channel with out any gain.Cheers []

Some day some one will think of installing 120mil computer fans to cool the insides,Well Let it be me[] diy.

Id keep my rt12 over any svs by far.

Most of the time when they mention thisthey have never heard,khorns/lascalas/herseys and the rest.They just dream about having a nice pair.[]

RS 25's will go nice with what you have for the rear.

I can only spend 10g a year for my habit, Or # 2 Kicked in the A$$ by my wife[]

Gee this big monster we can cut in half,And we will both have a nice size box.[].

[]Whats she doing on the other side of the room any way with items falling off the walls ? Nice audio shop,Sounds like future pooper Ear.[]

I know they are great little subs,Why are you selling your Jack in the Box[]

Upgrading from the sun sig to the Martin Logan Descent is quite the improvement in bass, and pure clean output.I have never owned the sun sig but tried it for a while,The sun sig is not as clean as the ML,My ML Descent i just love, pure natural and body moving deep bass.

MR SUB Jockey Do this test for me will ya,Lets see how much better sounding with out the 12" cone popping watching a Dvd,Lets see how much abuse your pw2200 can handle,Now there are not to many other good dvds movies to test subs other than Mr Incredibles..Well there are a few more but i always use this one to test many subs for extremely low sound,Turn your receiver to 80hz setting as normal setups,Now turn your sub level up to 3/4 setting,Now i dont know what receiver you are using,but this will work for any receiver selling on the market,turn your receiver volume up past half way point of its volume,Now watch the complete movie at this volume,close to half way through the movie you are going to get into heavy bass listen to 1-15 to 1-16 of the movie at this volume or as high as you want,crank her up,For sure the pw2200 will be popping the cone several times,and this is a very well known issue that the pw2200 can not handle any heavy duty cone movement,The pw2100 will handle any volume++ with this movie and have hard hitting deep defined bass.Have fun,Note: be careful you dont blow the 12' cone out because many have on this movie with the pw2200.

Well for starts the omni is good for the walls,If you are running rears you can always go for some custom RS stands in the proper height for the rears,here are the ones that i custom make for klipsch rs series,People like them and buy alot of them,I just used a aa battery to lift up the speaker to show you the under part.Actually i use these rs25 models shown for 2 rear centers,I have a large main sound room to fill,

remove the fuse make sure its not a blown fuse, wait 2/3 minutes reinstall,make sure plug is out of the wall when you do this,Plug the cord back in and try,do you hear any thing click pop,Me can fix up,But me not dare []

Can you change outlets for the hook up of your sub?,I dont know how long your sub cable is to do that,But try this first,Use a outlet closest to the main powerbox,test this and tell me what happens.Also let me know how this sub is hooked up,As for surge protectors I have about 3 of the best apc bars for my main system,Two bars control my subs and one controls the gear,always run a bar on a sub ! You can use the single protectors but they do not provide enough nanosecond protection.

Ear i enjoyed my trinty for a while having it,The claims they make on their site should be more straight forward of what you are receiving,i think then they would sell more,How many can toss the money just to test it,Not many dealers have them to stock,You have to hunt them down.I sold mine and didnt loose any money,I tested a MartinLogan Descent subwoofer and purchased one,How do i like it ?,Well I like it more than the trinty i had by far,The hgs18 that I borrowed also fell in the hole beside the MartinLogan Descent ,We hauled this sub for a 1 hour trip down to a buddy's with a vel 1812,His room was about 25x30,We compared the 1812 to the descent and after deciding ,he liked my sub better.He is now thinking of selling his 1812.

I got mine and it rocks,hard hitting against the wall,I placed it in the corner but I didnt like it.As link said ,It has more slam then the rsw15 I tested.

If i had to pay $900.00 for a pw2100 or 2200 to keep,I would have got some thing else,I have close friends that own several different stores and sell many different brands,$650.00 is agood price for the public,But the dealer is still making lots of money.All I had to say is the pw2100 with only a 10" driver is a little rocker when it comes to music, And for home theatre it kicks you in the gut.It puts the rsw 10 to shame.