[Inductors for Heresy I's tweeter & squawker?]

Would adding inductors on the tweeter and squawker make a improvement in the type E crossover and if so what size inductors should be used?

[Heresy II upgrade to III's]

Thanks for the info M.

[New Solen Inductors For Heresy II's]

Thanks Dean I may just do .Do you need to use the same gauge wire as the inductor is from the inductor to the crossover?

[Heresy II upgrade to III's]

So if you were to put in a titanium diaphram in the K-76 and upgrade the inductors and capacitors in the Heresy II 's there may not be as much of a sound change.

[New Solen Inductors For Heresy II's]

I have new Solen inductors for my crossovers in my Heresy II's and was wondering because they are not going to fit on the crossover terminal cup , I had to mount them on the bottom of the speaker cabinet and need to run about 4 inches or wire from the inductors to the crossovers what type of wire can I use to go from the new inductors to the crossover board? Thanks

[Heresy II upgrade to III's]

What is the main sound difference in the sound of the Heresy II's and III?

[Chorus II's sound comparison to Cornwall I's?]

Thanks for the info guess I will have to get them both.

[Chorus II's sound comparison to Cornwall I's?]

Was looking to pick up a pair of ChorusII's or Cornwall I's any feedback on the sound diff. ?

[2nd Heresy I crossover rebuild]

Nice...

Thanks I did a pair in my other Heresy I's and was so pleased with the sound I did the other ones however I am selling these Heresy's off by parts as I have my eye on some La scalas and have to make room or move to a bigger place so I am selling a pair of Heresy's and KG4's.

[2nd Heresy I crossover rebuild]

I am on vacation this week so I have rebuilt my other Heresy I's crossovers almost like the others only this time I used teak wood and 24k parts.

[New inductors for Heresy II crossovers.]

I am going to replace the inductors in my Heresy II's with some new Solens( .15 litz #16's and 2.4 #14) I am going to mount the on a board then decide where in the cabinet to put them.My question is what type of wire should be used to connect the inductors to the crossover board as it will be about 6 inches from the board if I attach the new inductors to the side of the inside of the speaker cabinet?

[Heresy II upgrade to III's]

Have a read... they worked out some wiring issues, etc. I am really wanyting to do this myself.

http://forums.klipsch.com/forums/t/100889.aspx?PageIndex=1

Thanks I may wait myself as I have other projects to keep busy with.

[Heresy II upgrade to III's]

Was thinking of the update package Klipsch offers to upgrade Heresy II's to the III was wondering if anyone has done it and if there is that much sound difference between the II's & III's ?

[Woofers for Heresy]

If you're working on your H II's, why not buy the upgrade kit and make them into H III's? $272 each and you can sell all your other components for a net cost of probably $150 per upgrade kit!

I got one to play with. Part number is 1006972.

Are all the drivers and crossovers the same size or do you need to make modifications to the Heresy II cabinets?

[KG-4 crossover inductor values]

Anyone have the values for the 2 inductors on the crossovers on the KG-4's ? Edit - Sorry found them in a post.

[Heresy I crossover rebuild]

I had some extra parts around so I put them to work.I had two extra 2.5 #14 solen air core inductor and a bunch of 1.8 Kimber Kaps so I replaced the stock 2uf's with the 1.8 Kimber Kaps and added a Dayton .22 uf film and foil by-pass cap to come closer to the 2uf,not sure If needed to put the .22 in but I had a few of those as well so why not, The high end sound is much nicer now and as far as the low end I am not sure but I know the Heresy II uses coil inductors so it must be a better way to go but unless you want to spend the money I think the stocks are ok .

The Solen aircores are a big plus after listening and comparing the two ,one with new caps and old woofercoil to the one with new caps and new Solen aircores made the old bass sound muddy.

[Heresy I crossover rebuild]

Just wanted to share this Type E rebuild.

[Woofer Coil on Heresy E Crossovers]

I am also going to replace my inductors on my Heresy II's and was wondering if a 2.5 woofer coil will work in place of the 2.4 it calls for?

[Woofer Coil on Heresy E Crossovers]

Are you sure it is 2.2 and not 2.5? I am seeing other posted saying it is 2.5?

[Woofer Coil on Heresy E Crossovers]

I have a pair of Solen 2.5 air core #14 AWG coil's and was going replace the stock woofer coil in a set of my Heresy I's do I need to modify anything so these will work.?These are extras I have and wanted to put them to work rather than sitting around. Thanks

[Pioneer SX-1980 Receiver]

Had you considered that this was no coincidence that your neighbor wanted you to have this receiver?

[Parts]

Thanks JW[H]

[Parts]

Thanks I use mcmaster. I guess I meant to say another co. like Parts Express not just audio. Thanks M

[Parts]

Any other good parts co. other than Parts Express that have a good selection of audio parts?

[By-pass Capacitor?]

Is there any facts to back up that the more exspensive caps are better or is it a personal sound preference ?