capchino

Any help or opinions would be greatly appriciated.I have a rf-82 system. It will be used for a dedicated home theater system. I am unsure on what reciever will be a good match. Any suggestions????????

Unfortunately I am computer illiterate, so i can not post a sketch. But while looking throught this site today I found almost the same design i am going for. Here is the link. http://forums.klipsch.com/forums/p/86400/870241.aspx#870241 The only differences would be that i my center channel will be below the screen instead of behind. The sub would be placed to the right of the center. But behind the speakers would be a room about 4' x 12'.

New here. I am building a home theater in the basement.(21'x12') I will be using a sony vpl-vw50 projector and the RF-82 system. On the wall with the screen will be my two rf-82's under the screen will be my center channel angled up. Now I am going for a stealth installation on the speakers. I will have a fixed screen centered on the wall. To the sides and underneath will a black fabric that matches the black wall the screen will be on. Behind the fabric i am going to conceal my speakers( making a fake wall so to speak). Here is the part i am not sure about. My 2 rf-82's on either side is getting pretty close to the side of the wall. I here most people place the sub in the corner, but with this setup i do not have enough room in the corner for the RSW-10d sub. Would it be bad to place it between the center channel and the right rf-82 behind the fabric? Also behind the screen and fabric is empty space 12'x4'. Would I need to box in the sub or any other of the speaker for them to perform as they should? Any help would be greatly appreciated. Thanks chino