calvinj

This worked for me takes only a couple minutes and is very easy. Okay guys, ealrier today after playing some obnoxiously loud death metal I realized that my right channel was getting all distorted and then stopped working completely. [:|] Naturally, I freaked. I felt releived when I found out that the right channel would come back if only for a split second when turning off the system and so I concluded that the pod was the problem. This is what I did to get the right channel working perfectly again: 1. Unplug the system (safety first) 2. Remove pod from the speaker (it should slide off after removing the speaker legs/stand) 3. Open up the pod removing the cover and removing the board from the enclosure (careful not to touch the circuit board so you don't cause static e. damage) 4. Now simply, CHECK THE CONNECTION OF THE THICKER CABLE TO THE BOARD AND RESEAT IT (It wouldn't hurt to spray the board with compressed air as I did cause mine was covered all kinds of dusty artifacts) I know how much you guys love your Klipschs so I hope this works for you [H] -Calvin