rlkoch

Do you know a good source for purchasing the control POD for this unit. The replacement cable works great however I've notice that the control POD is flaky lately and I'd like to replace it. Klipsch is currenly out of stock on it.

shoudl have read, "until there was almost none left" instead of "until thre was almost none left" oops

Hello, I can also validate what others are saying. I purchased a cable from you a while back and had the same experience with the cable connector. I ended up trimming back the plastic casing until thre was almost none left and then I achieve a snug connection. If the metal part stuck out futher and connected to the pins correctly without having to trim the plastic, that would be ideal. The rest of the cable connect/repair went very well. Thanks.

Although I'd recommend soldering them after you splice them,You can splice the wires together and then wrap electrical tape around the individual spliced wire ends without soldering them.You might consider purchasing some inexpensive wire nuts that will twist on the ends if you don't solder them, this is an inexpensive and easy solution. You just have to buy the right size. This will not look as good but will work well. I spliced mine to test it first and then once I knew they worked, I decided to solder them for an even more solid connection and then taped the individual ends. I spliced mine about 1/4 or maybe 1/2 inch. My unit works great now! You're will as well.

Excellent, How do I order one? do you have a site I can to and order/pay you?

Hello, Are you still offering the replacement DIN cable for $10 delivered? Regards, R. Koch