djnick

yes u can do it way u just said use wire in out left left side right right side in and back up to r82s

email them they reply in 24 hours technical help emails tell them what part u nee dto know about they tel u value or the no named part in the q socket so they know what one u talking of

klipsh will give u sheet for vaules of parts inside just not shimatics for mosfets so u know restince on that sub if u cant identifty a mosfet tell them what socket u see it in they tell u what part tht is in that q socket area k

such new technogies proably needs firmware update my harman kardon has port on back i can just upload myself to fix issues like that sumtimes but be sure says sw on in sterio and lfe is set to 0 meens on k and on klipshe sub set the cross to 80 hertz k

ok but did u do what i said lfe to 0 ? in sterio on sub set itto 80 did that work ?

u can call me if u need me to walk u throw it on phone

also dont use trhow off on sub itself turn that back on to 80 on sub itself k rest read what i said should work let us know

also one more thing in sterio set video to 720 p k ifuseing hdtv boxs ect dont use 480 look like poo try that what told ya let us know k

and lfe setting on sterio in lfe menu setto 0 ok then on subwooferitself setto 80 hertz cros n sub should work

then go in lfe atenution mode like u said setthat 0 ok then go to sub set cross ove ron sub itself to 80 k thats it should work

Digital Video Conversion ON SPEAKERS A Surround Back System Normal Speaker System Front SMALL Center SMALL Surr SMALL SB SMALLx2 SW YES Crossover 80 Hz X-Curve OFF DIMMER brightest theats whats your settings should say in menu like that

so set lfe to 0 on sterio then go back to kilpshe sub setthat cross over in sub at 100 or 80 so dont go above 100 hertz to mid bass area sound funny k let m eknow this has to be it

is the lf on in pineer ? sorry about spellin just bad speller i type to fast just mentto ask make sure uusein all hdmi cabels if uc an for best sound pic k not red green blue cable for less pic quilty coumpiunt k but cheak lfe again settings on setrio is it off ? or at 0 setit at 0 tell me if this works now

Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value. When set to –5 dB, –10 dB, –15 dB or –20 dB, the LFE is limited by the respective degree. When OFF is selected, no sound is output from the LFE channel. is that on ? 0 did this solve it ?

http://www.pioneerelectronics.com/PUSA/Unassigned+Content/VSX-1019AH-K+OPERATING+INSTRUCTIONS link to your manul reading it now yes make sure manaul mode set sub on in menu and cross over for sub in sterio not sub is at 150 on pinoneer k then on sub set that crss over ta 80 or 100 k whatebt jits right make sure uusing all hdmi cables if uuse hd tv blurays for best pic and sound im reaidng in manail now on sub

dont set actaul sub at 150 no sub menu 100 hertz 80 max k lpf on sterio menu on sub there is corss over also u must adjust ok did u

ya dont want throu put on sub set lp filter on it at 100 max on sub hertz this cross over im talking about is on the sterio itself in menu for sub can be on wrong setting hertz cheak it out make sure on in menu too if ask

http://www.newegg.com/Product/ImageGallery.aspx?CurImage=82-117-300-S04&SCList=82-117-300-S01%2c82-117-300-S02%2c82-117-300-S03%2c82-117-300-S04%2c82-117-300-S05&S7ImageFlag=2&Item=N82E16882117300&Depa=0&WaterMark=0&Description=Pioneer%207.1-Channel%20A%2fV%20Receiver%20VSX-1019AH-K PIC OF BACK SIDE AND FRONT USE SUB PRE OUT TO SUB ON BACK STERIO SET CROSS OVERS TO 150 HERTZ ON SUB IN MENU K

LOOK LIKE U CAN SET CROSS OVER ON FRONTS ECT ALSO USE 80 HERTZ OR 100 K AND ONLY 100 HERZ ON SUROUNDS ONLY DONT GO LOWER

ALSO MAKE SURE BACKS FRONT AND CENTER ALL SETTO SMALL K 100 HERTZ CROSS OVER IS SMALL USALLY MANAUL OVERRIDE IT DONT DO AUTO

Double check all settings across your system. The settings in my BD player were wrong so I wasn't getting the full HD audio passed through to the 1019. I had my BD audio set on 'mix' rather than 'direct' so I was only getting PCM audio through the speakers. This is just one example of what can go awry if the ins and outs, both audio and video, aren't configured correctly.

OK SO GO IN MENU ON SCREEN OK SET SUB CROSS OVER TO 150 HERTZ SO IT GETS 20 HERTS TO 150 IT DO THEN SET FRONT SPEAKERS TO SMALL OK CHEAK ON RW10D CROSS OVER IN MENU SET THAT AT 100 OR 120 WHATEVERFEELS GOOOD -6 ECT K SHOUDL DO IT FOR U

THATS IT BOSS I KNEW IT THE CORSS OVER IN MENSU ON SUB SET AT 150 SUMTHING DUMB LOWER IT The other setting it took me a while to find was the cross-over setting for the subwoofer. I couldn't figure out why I wasn't getting any bass until I set the cross over to 150 hz (set speakers to small).

Cons: Difficult to set up due to all the features. The manual is a reference book, not a step-by-step. No switched outlet on the back so make sure your sub has auto-sensing. they talk about auto sensing on sub rw10d has that on back erther on or off wondering not triggering it sumhow

Front Panel Display, OSD, and LFE Features: The fluorescent front panel display and Onscreen menu system make setup and operation of the receiver easy and fast. Also featured is an adjustable crossover on the Subwoofer LFE (Low Frequency Effects) pre-out channel. they talk about cross over built in to sterio for sub u dont have that way up by acdent do u