tubesandhorns
-
Posts
34 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by tubesandhorns
-
-
On 6/23/2023 at 4:22 AM, Marvel said:
You could build just the bass sections. Dennis Kleitsch (RIP), made 12 at a time.
Marvel, I am unable to buid a set but would be interested if you know of someone who makes them for sale. I too have been watching for some bottoms.
-
All sold, thanks
-
Mid pair A&B have been sold. Make an offer on C&D. Thanks.
-
Moved sale to ebay
-
-
SOLD EV T35A tweeters $125 per pair plus shipping. Taken from my home stereo and used with lower power tube amps. Resistance measurements in pictures. This auction is for a pair of tweeters, and I have 2 available pairs, and they are very similar. Take both pair for $225. Shipping will be 10x8x6 inches and 4 pounds per pair, I will combine if you buy both, shipped from 28601.
-
EV 1824M mid driver with 8hd horns. One pair (A and B ) are in excellent condition for $200 for the pair plus shipping.
The other pair (C and D) have small toddler finger indentations on the screen but work and sound fine, $150. Taken from my home stereo. Resistance measurements in pictures. Take both pair for $300. Shipping will be 16x12x12 and 20 pounds per pair, shipped from 28601.
-
Glens,
Thanks for the input. Shorting rings are added to lower distortion and (I believe) flatten impedance, but I can't say if these are helpful at my listening room levels. That is the information that I am seeking. I think that I am fine to buy standard model, that is for sure, but it is worth my while to seek some insight from anyone who has compared them... if such a person exists and is on this forum. I used my current EV1824M for over 30 years, I would like to repeat that success of selecting, buying, and then stop thinking about it. While I'm at it though, I should show diligence.
-
Deang- you are 100% correct, but that is my problem/question... does it in fact sound better? I also think that this begs the question... are there any down sides? If it is maybe better/maybe not, but no worse... well, that would be that. Thanks for chiming in.
-
Max2- Thank you for your reply. I am curious what factors led you to going with the HE version. The standard ND is such a favorite, why did you pick HE?
-
I intend to upgrade to BMS 4592ND-Mid drivers for a 3 way horn system, tube amps, passive crossovers. I have heard conflicting opinions from 2 parties whom I respect- one says that the 4592HE is the way to go because for minimal additional cost it adds a shorting ring that lowers distortion and flattens out impedance. The other says that HE is for high power, and for my home stereo it adds nothing. I see some threads about shorting rings and some unanswered questions about these specific drivers, but do any of you have any experience directly comparing these or similar drivers with and without shorting rings?
-
I am upgrading my speakers with a new mid horn and driver. Right now I have a Fastlane LaScala tractrix (1 3/8" throat), and will upgrade to a BMS 4592 with a Volti FC260ii (2" throat). I am chomping at the bit, but Greg is pretty tied up and I won't see the horns until later this year... which I understand- so now problem with that. So my question- can I do this incrementally, that is, what happens if I get the BMS or other 2" drivers now and I either bolt them or use the Eminence HA14-2 to put them on the Fastlanes until the Voltis arrive? I see posts that describe going from a small driver to a large throat horn, but this is the other way around. Thanks
-
I need a pair in good shape. Help you out and save me a little money. Thx.
-
I am thinking of upgrading the mids on my 3-way horn system to a Volti FC260 tractrix, but am undecided on the driver. Many phenomenal systems have been built using the BMS 4592ND-MID (around $650 each), so that is a top contender. Much of what I read, and a little of what I have physically auditioned, however swears by Beryllium... which seem significantly absent from posts. Admittedly that was with Classic Audio Systems that had not only Beryllium but also field coil drivers Beryllium plus field coil is out of my price range - and it's impossible to separate variables. Looking at new Beryllium, Radian drivers look amazing... except for the prices: 760NEOBePB at $850 each, or the 950BePB at $1100. True, that is a big increase, but in the long run... in for a penny in for a pound. Three years from now I will have forgotten about the extra money. So... anyone out there have insights or experience on this? I am probably willing to spend the dough, but would rather not unless truly a significant step up. I tri-amp so efficiency is not an issue, and I am satisfied with all other specs.
Thanks.
-
I started with k77's then tried beyma, then atp200 which I liked then fostex 90a's which I love and still use.
Canyonman, I found this statement fascinating. I have been thinking about jumping from my T-35 to some ribbons, and would be interested in any insights from your process or conclusions that landed you running the 90a's.
After posting this, I found this string: https://community.klipsch.com/index.php?/topic/151425-fostex-tweeters/
Answers my questions, but any further insight is helpful. I have read a lot about the above-hearing frequencies adding to the spaciousness. Was that your experience as well?
-
PM sent.
-
1
-
-
I have become intrigued with discussions of the reported improvements to system sound afforded by the addition of super tweeters- specifically the air and coherence. Being in my late ‘50s, I am less concerned about the frequency extension and more concerned about how it affects what I can hear. My question is this- my amp goes to 20kHz, do I need an extended frequency range amp for driving this?
Same question for digital crossovers like the DCX2496.
-
Last call before listing on ebay tonight.
-
Price drop to $450 plus shipping.
Thanks for looking.
-
I was asked about age. I am not sure of the year, but I think 1984 because the serial numbers are 84T79x and 84T80x- not quite sequential, but close.
They have K77 tweeter (round magnet assembly, not rectangular), K55V mid, and K22EF woofer. Type E crossover, originally model H-BR.
Thanks.
-
I have added a picture of a chip in the formica that I forgot about on the side near the bottom back corner... remember these aren't from a living room, they were in a studio. And as much as we all love Todd, these go way beyond his recordings. These speakers have seen music history being made, check out the link and read some of the bands…
http://en.wikipedia.org/wiki/Bearsville_Studios
Thanks for looking.
-
These are Heresy 1 speakers which were used at Bearsville Studio as monitors, and I don’t have to remind you of the classic albums which came out of that studio. I will include a copy of the receipt on Bearsville letterhead from when I bought them. I was a HUGE Todd fan and had to have them, but am now downsizing…
Some modifications:
- 4 screw holes on the top for hanging from the ceiling at Bearsville
- Todd had them covered in this funky brown formica, which has the advantage of really making the cabinets non-resonant. This is my third pair of Heresies, and they are head and shoulders above stock in cabinet rigidity.
- I replaced the capacitor with films, but left the originals (which were still working) in place in case I ever wanted to return to stock.
They play well and sound great. A good price on a pair of Heresies with some cool history. I wanted to give forum members first shot before ebay.
The pair are $500 plus shipping from North Carolina in two boxes.
-
1
-
I share your love for DVD-Audio. What I do is download the hi-res files from hdtracks.com and burn them to DVD-Audio format using Cirlinca DVD-Audio Solo. Works great, great selection.
-
Thanks tigerwoodKhorns, but I was referring to the modification that I frequently see on this forum where the doghouse volume is increased by adding a 10" section at the bottom, and 2 ports are tuned to lower the bass cutoff to mid-30's. I was asking if and how that would be done with the 8" woofers.
Klipsch Jubscala conversion Question
in Garage Sale
Posted
PM sent