Storm AV

Hi fellas, Had the dreaded blue light no thump problem, possibly just the red light, I resoldered all connections on the phase/auto power switch/crossover/level board after reading supewredge88's solution-this ta. I have isolated the problem to the auto power switch, simply get a soldering iron, get a little solder on the tip and touch the connections on the underside of the board, won't hurt to do this to all joints on the board and your problem should be solved.

Greetings from Down Under[H] Big thanks mate, your fix on the Sub 10 worked fine for me as a extra precaution I re-soldered all joints on the switch control board and all works fine. I did notice a slight hum before re-soldering the joints and this was gone after a half hour of iron work. One thing for others trying this fix keep the sub turned on when screwing the amp back into place as it may cut out again when tightening the screw to the right of the switches. I picked up the sub from a customer who replaced it after the failure-what a bonus!