Jump to content
The Klipsch Audio Community

memphis2k

New Members
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral

About memphis2k

  • Rank
    Newbie
  1. It can be for the right price as these 15's are quite rare. I did fix the speaker portion and she does work incredibetly good. Aaron memphis2k@aol.com
  2. What is your budget? Ported or sealed? Bill Thanks Bill for the reply. I did pull off the center cone on the speaker and re-apply some adhesive. Let it dry and ensured a good seal...tried it. Well, sure enough that did the trick. Ported or sealed. Well... the KSW-15 is ported so I guess ported. I'm just hoping to find a subwoofer for the KSW-15 enclosure. $150-300? Its a 9.5 by 13 room with entrance from the right, lower family room in the bi-level house. Haven't done the subwoofer crawl yet, but guessing the sub will go in the corner.
  3. Hello all, I have an KSW-15 that has been in storage for ever but finally got around to setting it up and the subwoofer has a rattle in the speaker itself. LFE hooked up and begins to rattle not much beyond a low volume level. Pioneer 1020 amp and tried a few settings on it. Removed the speaker and nothing obvious is wrong. Can anyone recommend a replacement subwoofer, I prefer to replace just the subwoofer. Used/new.. maybe klipsch? Other brand? Here are the specs from the manual: KSW 15 T ype: 15" bass reflex, tuned port enclosur e Amplifier: Peak output power 800 watts into 16 ohms FTC Rated Power : 265 watts into 16 ohms 22-100Hz @ 1% THD maximum Auto Power On: 2 second ON delay, 15 minute OFF delay Frequency Response: 24-120Hz±3dB Maximum Acoustic Output: 121dB 1 / 8 space 1 meter Low Pass Crossover: Continuously variable from 40-120Hz, 24dB/octave slope above 120Hz Inputs: 2) Line level RCA phono jacks 1) Line level dedicated LFE channel input (non-filtered) 2) High level speaker terminals Outputs: 2) Line level RCA phono jacks with switchable high pass filter between 50 and 100Hz 2) High level speaker terminals with fixed high pass at 100Hz, 6dB/octave slope Phase: Switchable 0-180 degrees Drive Component: K-1072-K 15" (38.1cm) driver Net Weight: 45 lbs. (20.45kg) Height: 19.5" (49.53cm) W idth: 17.5" (44.45cm) Depth: 17.5" (44.45cm) Cabinet: Medium density fiber board construction (MDF) Finish: Matte finish black vinyl V oltage: 110/120 VAC 60Hz - Export Version 230 V AC 50/60Hz Thanks, ~Aaron
×
×
  • Create New...