memphis2k
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by memphis2k
-
-
Memphis2k(Aaron),
Welcome to the forum.
Sorry to hear about your KSW15.
Can anyone recommend a replacement subwoofer, I prefer to replace just the subwoofer. Used/new.. maybe klipsch? Other brand?
What is your budget?
Ported or sealed?
Bill
Thanks Bill for the reply.
I did pull off the center cone on the speaker and re-apply some adhesive. Let it dry and ensured a good seal...tried it. Well, sure enough that did the trick.
Ported or sealed. Well... the KSW-15 is ported so I guess ported. I'm just hoping to find a subwoofer for the KSW-15 enclosure. $150-300? Its a 9.5 by 13 room with entrance from the right, lower family room in the bi-level house. Haven't done the subwoofer crawl yet, but guessing the sub will go in the corner.
-
Hello all,
I have an KSW-15 that has been in storage for ever but finally got around to setting it up and the subwoofer has a rattle in the speaker itself. LFE hooked up and begins to rattle not much beyond a low volume level. Pioneer 1020 amp and tried a few settings on it. Removed the speaker and nothing obvious is wrong.
Can anyone recommend a replacement subwoofer, I prefer to replace just the subwoofer. Used/new.. maybe klipsch? Other brand?
Here are the specs from the manual:
KSW 15Type:15" bass reflex, tuned port enclosureAmplifier:Peak output power 800 watts into 16 ohmsFTCRated Power:265 watts into 16 ohms 22-100Hz@ 1% THD maximumAuto Power On:2 second ON delay, 15 minute OFF delayFrequency Response:24-120Hz±3dBMaximum Acoustic Output:121dB1/8space 1 meterLow Pass Crossover:Continuously variable from 40-120Hz,24dB/octave slope above 120HzInputs:2) Line level RCA phono jacks 1) Line leveldedicated LFE channel input (non-filtered) 2) Highlevel speaker terminalsOutputs:2) Line level RCA phono jacks with switchablehigh pass filter between 50 and 100Hz 2) High levelspeaker terminals with fixed high pass at 100Hz,6dB/octave slopePhase:Switchable 0-180 degreesDrive Component:K-1072-K 15" (38.1cm) driverNet Weight:45 lbs. (20.45kg)Height:19.5" (49.53cm)Width:17.5" (44.45cm)Depth:17.5" (44.45cm)Cabinet:Medium density fiber board construction (MDF)Finish:Matte finish black vinylVoltage:110/120 VAC 60Hz - Export Version 230VAC 50/60HzThanks,~Aaron
KSW15 Need replacement sub or similar
in Subwoofers
Posted
It can be for the right price as these 15's are quite rare. I did fix the speaker portion and she does work incredibetly good.
Aaron
memphis2k@aol.com