drueppel

Klipsch iGroove HG model 1006519 power supply is a PHIHONG PSM36W-201 Can usually be repaired by replacing the small 100 uf 35 volt electrolytic capacitor C4 (next to the top of the large electrolytic capacitor) See the PSM36W-201.jpg file attached. Observe correct polarity. Negative is toward the more open area on the circuit board. 100uf, 50 volt is okay. $1.50 at Radio Shack. The connector pinout is two ground pins closest to cord. +18 V on left top, -18 V on right top (with cord aimed down) All you need is a small soldering iron, solder sucker, and a bit of solder. Good luck.