thexbehemoth

Fixed! The connector bar was connected to start. I disconnected everything, moved my + wire down to the other terminal, and put the bar back on, and only had tweeter sound at first. Just like before. I also ensured I had tightened all 4 terminals down with my fingers just to be sure. I tapped the top woofer gently, and then got sound out of everything. (A little percussive maintenance.) May have been just a hair loose, or something. Thank you so much!

Hello. I have a pair of 250F Floorstanding speakers, driven by a Sony STRDH550. I also have a R12SW Subwoofer, a R-25C Center, and a pair of RP-240S Rear speakers. I have good sound out of all the other speakers, but I am getting no sound out of just the woofers of one of my two 250F's. I have sound out of the tweeter, but nothing out of the woofers. Comparing to the other speaker, I have full sound out of both woofers, and the tweeter. As far as I can tell, I am getting full signal to the speaker (Not just treble, or something odd), but I have some hardware issue. Any hints or things I could try before attempting a return or repair request?