Diesel

Thanks I should be ok I can't wait to get it all set up I'm hoping it's gonna be a big difference in sound quality by going to the 280s and a 450c as a front stage. Iv never listened to any of them just liked all the reviews iv read so I thought why not give it a try lol.

So I upgraded my home theater system I upgraded from a denon 2400h with 2 r-26f towers with a r-25c center channel and r-15m and 2 rp-140sa and r-12sw. I upgraded to a denon 4500h with 2 rp-280f and a rp-450c my question Is can I use my r-26f towers as rear surrounds with my rp-280f as my front stage? Since I all ready have them. But don't know how it will sound with mixing reference with reference premier lines. Any input would be great thanks I should have all my speakers by Friday.

But in the test tones dont you set all you db levels at default 0 then turn your volume up to a certian point then adjust your db level till your meter hits 75db i just need to know where do i start with the volume level.

I have a denon avr x2400h and i wanna calibrate my speakers can some one kinda walk me threw it iv never done used a spl meter iv always done it by ear or auto calibrate. I have a radio shack analog sound lever meter. I wanna set my speakers to 75db but where do i start my main volume level at befor i adjust my dbs? Bc my volume level is adjustable its not a set level. Thanks.

So tell me what you guys think i re did my audyssey and here is how it set my speakers up. Fronts set to large Center set to small Surround set to small Front dolby set to small Fronts set to full band Center set to 60 hz Surround set to 40hz Front dolby set to 90 hz Front L -6.5 db Front R-5.5 db Center -9.0 db Sub -4.0 db Surround L -7.5 db Surround R -6.0 db Front dolby L -2.0db Front dolby R -1.0 db Please let me know what you guys think of how it set it up and what i need to change or just leave it. Thanks

My setup Denon AVR-X2400H 2/R-26f 2/R-15m R-25c 2/Rp-140sa R-12sw

Davis on the denon 2400 there is a setting you can set for hight or celling or upward firing for atmos. i get sound just not what i was expecting i guess to me for the money it wasnt worth it so far but im gonna play around with it im gonna do a recalibration on it and see it that helps .

Yeah i guess i was looking for more bang for my buck ill try a re calibration and see if it makes a change. I watched hacksaw ridge and not much movie content played threw the atmos speakers and at a low volume. I turned up the db a few just to get move volume threw them

Ok ill try that thanks

I ran the calibration when i first got my denon i was just running 5.1 my rp140sa just came today i hooked them up and manualy set them to 80 hz and celling distance and watched a movie i didnt re run my calibration. Bc befor when i did my calibration i wasnt happy so i went back in and tweeked with the settings.

Yes i ran multi channel and sound comes out from all the reviews iv read people are amazed with them and the sound and im like over here not impressed. Now i didnt re run my audyssey i just manualy set the settings would that change anything?

I just got my klipsch rp140sa got them hooked up to a denon 2400h in a 5.1.2 setup and watched a movie with atmos and not much sound comes out of them. I was very dissapointed Iv tried them at 80 and 120 hz what am i doing wrong iv tried dolby atmos and dtsx and still same amout of sound comes out. Any ideas?