fanofbully
-
Posts
86 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by fanofbully
-
-
They are pending another forum member.
-
Looking to sell my set of HII Oil Oak.
They have been sitting for a while and need to go to a good home and I would prefer they go to a forum member.
$500 local pickup Oxford, MS.
Titanium Tweeters
Crossover with Corbin Dubilier Caps
Birch Risers (not pictured)
Other Items
$100 Bic F12 sub
$250 Parasound 2125 V1
Message me if interested
- 3
-
-
- 1
-
This looks like this could be a deal if he is willing to sale the Chorus II by itself. The two Yamaha pieces have value, probably worth $4-500 together if working. That MX-830 is a nice amp. $200 for a Chorus II could be a steal, if not for just the parts alone.
-
Here is a deal for someone in the Detroit area. Tried to get them to ship but was a no go.
Should contain K-65-E and k-43-KP cast frame. The two horn lenses alone are worth the cost. The K-43-KP lets just say is awesome.
- 1
-
-
Looks like a great deal. Awesome speakers.
https://www.facebook.com/marketplace/item/1307070389729021/?ref=saved&referral_code=null
No Affil
- 3
-
https://www.facebook.com/marketplace/item/1134988763643617/
looks to be a nice set of KP-250 II for $200.
no affil
- 3
-
-
- 1
-
To the Klipsch KP Professional guys.
There is a single KP 302 for sale in Fort Collins Colorado for $73.00.
https://www.musicgoround.com/products?search=klipsch
If I am not mistaken it should have the sought after K-48-KP 15" woofer in it along with KP-65-E with a K604t horn. You will need to verify they have not been changed, but is a great deal if you are near.
I did ask for shipping and it was around $140 +73.00 shipped to me so I passed.
No Affiliation
-
I am interested, I will send you a follow up PM.
I am building a custom center channel that will fit my entertainment center using some spare parts I have lying around, and before I place a bunch of money in it I want to see how it sounds.
Attached is a raw version of the Top Section.
So basically I am bored, have a bunch of junk parts that my wife wants out and have no clue what I am doing
- 1
-
15 minutes ago, Lbk said:
I think I have a Quarter xover, I will check tomorrow and let you know. Where are you located?
Sent PM, I am located in Oxford Mississippi.
-
WTB a single Crossover from one of the following:
Chorus II
Forte II
Quartet
KP-301 II
KP-362
Also looking for a K-792. Just need the magnet so a K79 or k75 will work also.
-
There is a nice set of Cornwalls listed in Jackson Mississippi area for $750 obo.
https://www.facebook.com/marketplace/item/240657574033180/
no affiliation -
The KP-3.6M?(Perhaps KP-3.6A) is for either a KP-301 II or KP-362
The KP-3.0B is for a KP-301
The K-48-EP is out of a KP-362 most likely and will should be an equivalent replacement to the k-48-K.
The other drivers appear correct for the KP-301.
301 PDF https://community.klipsch.com/applications/core/interface/file/attachment.php?id=171485
You will need working KP-3.0B crossovers for both KP-301 speakers.
Schematic from another thread: https://community.klipsch.com/applications/core/interface/file/attachment.php?id=37951
Test each driver with a meter to make sure they still show the correct ohms, and replace any diaphragm etc that test bad.
Check the fuses on the back of your input panel to make sure none are blown.
Hope this helps.
The KP 301 should have the following specs.
K-79-K
K-57-K w/K-601 horn
K-48-E
Response 36 Hz 20kHz.
Crossover type KP3.0A
101 dB SPL with 2.83 v input measured in a 100 cubic meter room at 1 meter.
Max SPL 124 dB at max continuos power rating of 200 watts
82 lbsThe KP 301 II Should have the following
FREQUENCY RESPONSE: 45Hz - 20kHz±4dB (-10dB @ 39Hz) @ 3 meters, 1/2 space anechoic
SENSITIVITY: 102dB @ 2.83V, 1 meter, 1/2 space anechoic
POWER HANDLING: 400 watts (41.5V)
CALC MAX CONTINUOUS OUTPUT: 125dB
COVERAGE ANGLE: 60° Horizontal x 40° Vertical
DIRECTIVITY INDEX (DI): 9dB ±2dB
NOMINAL IMPEDANCE: 8 ohms, 4.3 ohms minimum @ 1401Hz
TRANSDUCERS: One K-792-KP compression driver, one KP-66-E titanium compression driver and one 15" K-48-KP woofer
CROSSOVER FREQUENCY: 650Hz and 7kHz
INPUT CONNECTIONS: Dual red/black five-way binding posts and dual locking Neutrik® Connectors (see pictures)
DIMENSIONS (H x W x D): 32.625" (82.9cm) x 20.825" (53cm) x 16.825" (42.9cm)
WEIGHT: 82 lbs. (37.2kg)
- 2
-
I am in Florida on Vaca and saw these in my Facebook feed.
Beautiful looking speakers. Look to be Walnut Oil.https://www.facebook.com/marketplace/item/253973765890902/
No affiliation
- 2
-
Single KP-110-B $50 + Shipping. Sold As Is. Willing to part out also.Does produce sound.
I received this on a trade and have no use for it.
It does a have a K-761-KP, and Eminence Alpha for the 8 inch sub.
Would consider full or partial trade for parts off a KP-301 II or KP-250 II. K-792-KP K-66-E, Crossovers and Speaker Terminal etc.
or
Set of Titanium Tweeters for K-792-KP, or Quality Film CAPS to rebuild KP301-II Crossovers (2 * 1.5uF, 2* 2uf, 2 * 3uf).
-
Un-used Matched Pair of Tung-Sol 6550 tubes that I no longer need, I would like to get $60.00 for them shipped.
I also have several untested 6AN8 and 6An8A tubes I will throw in with the purchase that were given to me for free if wanted. . These need to be tested and may all be bad (5 Hewlett Packard by RCA, 1 Tung-Sol, 1 Sylvania. I sold my Dynaco Mark III amps and tester some time ago and just never got around to testing them.
Would consider full or partial trade for parts off a KP-301 II or KP-250 II. K-792-KP K-66-E, Crossovers and Speaker Terminal etc.
or
Set of Titanium Tweeters for K-792-KP, or Quality Film CAPS to rebuild KP301-II Crossovers (2 * 1.5uF, 2* 2uf, 2 * 3uf).
-
-
-
-
Thanks but wanting to stick with the KP models.
Cleveland now has the Mississippi Grammy Museum, if you like the Blues the Delta is a great place to visit. Used to visit Rumors(believe is closed now) in high school.
- 1
Heresy North Mississippi $275
in Alerts!
Posted
https://www.facebook.com/marketplace/item/1177335603667334/?mibextid=6ojiHh
no affiliation