bagdrew

Can you purchase replacement resonators for the rear of KG2 speakers? It looks like mine have been glued in the past and are still ok but I want them in tip-top shape. Thanks in advance you have all been so helpfull

Can anyone give me some advice on refinishing a pair of KG2,s. Do you do a light sanding then a re-oil or do you need to take all the finish off? Has anyone attempted to take the oak and stain to a darker color(near black. Any advice on procedures and technique would be much appreceatied. Thanks!

Hi there, I have a question for you experts. I have a Yamaha RXV 1105 that has an impedence selector switch. I am running a pair of RF3's on the "A" switch and just aquired a pair of KG2's that I want to run on the "B" switch. My manual gives me two options "If you use one pair of main speakers the impedence of each speaker must be 4 or higher. If you use two pairs of main speakers the impedence of each speaker must be 8 or higher. So what do I do? Will I destroy my reciever by running 2, 8 omhs speakers on "A" and 2, 4 ohms speakers on "B"? Please Help with any advice or ideas. Thanks Thanks for your replies, here is some clarification When I refer to A & B I am speaking of the speaker switches that activate a pair for A and a pair for B. The text in quotes is exactly as stated in my manual. It does not switch directly b/w 4 or 8 ohms but gives you the cryptic instructions in quotes above. This message has been edited by bagdrew on 04-29-2002 at 09:46 AM