Jump to content

DRACONIAN

Regulars
  • Posts

    10
  • Joined

  • Last visited

Posts posted by DRACONIAN

  1. They are the thread holes on the bottom of the cabinet that hold the plastic feet on. Also, they sound perfect now, just perfect sound from them! I also checked all driver hardware to make sure they where all properly secured. Found some torx head screws that hold the woofers in slightly loose no big deal. Not worth the trouble of taking back to dealer.

  2. Well I finally found what the problem was, seems odd but the threads where the bolts that hold the legs to the cabinet, had air passing by them. I put a low Frq. test tone on and traced it down to the screw holes, you could feel air passing them. I applied teflon tape to the threads problem solved! As for upgrading, maybe go with RF-7's all around9.gif As for going with RF-3's all around that is what I had before upgrading to the RF-5's. I like having the larger mains for 2-channel music. The RF-5's seem to have a slight advantage in the mids. As for subs I already have 3 SVS's 2 front 1 rear, over kill huh! "NOPE"2.gif Thanks for the help.

  3. Both RF-5's have the exact same problem. I have played with all the EQ settings and tone controls with only a slight change.When I set them to small the problem goes away. I took my RF-3's from the back and put them as the mains and they sounded great not one problem. I have looked in the port for maybe they might have a problem from the inside lip of the port, no problems there. The insulation is also all in place. I called my dealer to see if maybe I could get a deal on RF-7's, but I rather have my RF-5's working properly!!

  4. After installing my RF-5's lastnight I found that on all the low notes the port makes alot of annoying whistling from port. Would not be that big of a deal, if it was not for the fact that it is so loud at times. I can't listen to some of my music if their is any below 70hz. Help me please, I would love to keep the speakers but if I can't correct the problem back they go!! HELP PLEASE!

×
×
  • Create New...