paul32579 Posted April 2, 2011 Share Posted April 2, 2011 I'm re-assembling some 1976 LSs and I'm sure I put the long screws back in the plastic blocks that split the woofer wires correctly... OK, the block sets flat on the floor of the upper section. Then, underneath in the bass bin, the long screws go though the woofer-wire circle clips, and the screws are inserted into the two holes at the underside and screwed into the block. Ergo, the screws are the electrical conduit connecting the upper and lower woofer wires. The circle clips for the woofer contact plywood. Is this factory? I was hunting among the fasteners for four nuts and eight washers that would connect everything if those screws were sent in from the top. Many beers have passed under the bridge since I took apart the guts. Can you lead me into the light? Quote Link to comment Share on other sites More sharing options...
Guest " " Posted April 2, 2011 Share Posted April 2, 2011 the screws are factory. make sure you maintain the same wire color code as you pass thru the cabinet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.