Jump to content

Bought a used IFI, problems.


flhx

Recommended Posts

Seller tested it before shipping and it worked fine.

I hooked it up and I don't get any kind of light showing it has power.

Should I get a light even without a ipod or other device plugged in?

I tested power cord, I have 121 volts going into unit.

btw; Visually the thing is in excellent shape and was sent in original undamaged box.

Thanks in advance for your help,

Tom

Link to comment
Share on other sites

Thanks,

Found the fuse blown.

Their are 4 larger caps and 1 smaller 1 off to the side of them.

This smaller 1 has some crud coming out the top of it.

An issue???

I haven't tried a new fuse yet.

Thanks again,

Tom

Link to comment
Share on other sites

yes, please replace all the 5 capacitors. you can use 4700uF 35V for all of them. choose a reputable brand like nichicon, rubycon, panasonic, etc.

if it doesn't help, install a resistor before the fuse. I encounter same problem with my used iFi, the previous owner installed a resistor before the fuse. he cut one track leaving an open circuit, and use a resistor between it. it looks like this: http://www.thevintagesound.com/store/bmz_cache/6/6f183a1848a0caaf18502b97200648d9.image.250x187.jpg 5W 2.2ohm only.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...