ux4life Posted October 12, 2007 Share Posted October 12, 2007 I damaged the 3 switches on the back of my RSW15 sub. Klipsch will only sell the entire replacement unit for 300 dollars. I have searched everywhere for the "board mounted spdt switches". Has anyone ever had to replace these switches before? If so do you have a part number and a part resource I can use? I attached a photo of the switches Quote Link to comment Share on other sites More sharing options...
michael hurd Posted October 13, 2007 Share Posted October 13, 2007 Why not epoxy 3 regular SPDT toggles to the board and use a short piece of wire to solder to the board? It seems like a pretty easy mod to me, a little 5 minute epoxy and 3 switches, a tad bit of solder and some wire... a $ 30 fix at the outside. If you do not have the soldering prowess consider taking it to an electronic repair shop to have it done for you. Quote Link to comment Share on other sites More sharing options...
sivadselim Posted October 15, 2007 Share Posted October 15, 2007 Did you do a search on toggle switches? (that picture is HUGE - 2.76mb - btw) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.