[Threaded Insert Size]

Thanks for the reply. No option to move to a 6' hight, sliding door in the way.

Sounds like some kind of angled speaker mounts is what I need, I'll take a look at parts-express for them.

[Threaded Insert Size]

Whats the Threaded Insert Size for the RS-35 and the RB-25.

My RS-35 (Sides) and RB-25 (rears)are about 7-8 feet up from the floor, is this OK, or should I angle them all down towards the sweet spot?

Thanks

[I droped a Klipsch speaker: the magnet fell off]

The same happened to one of my speakers from shipping, my was the buckling magnet,(video shielding), all I did was try to line it up to where it was originally in place, look for ink marks, or something and reglue with 5 min expoxy or hotglue.

Hope this helps..

[Shipping Damage]

So, I just recived my new, to me, Academy center.

As soon as I picked it up, I heard a loud clucking noise from inside.

Once I removed the woffers, I noticed the shielding magnets fell off the back of both woffers.

Whats the best type of glue to use, I was thinking either hot glue, or some sort of epoxy.

What do ya think?

Other than this, the speaker looks like new...

Thanks

I end up using hot glue, the buckling magnets were inclosed in a metal can, see picture.

Easy fix.

[Forte with pushed in Passive Radiator]

Thanks, for the quick replys.

yes its just the dust cap..

[Forte with pushed in Passive Radiator]

I've just discovered 1 of my passive radiators on back of my Forte's is pushed in a bit.

Right in the middle of the speaker.

Whats the best to to fix this? is it degrading the sound.

I see no cracks or holes, just a dent.

If I remove the speaker, can I just push it out, or is there a driver of some sort in back of the passive radiator?

What about using a vacume to try to pull it out?

Maybe letting some bubble gum dry up in the dent, than try to pull out?

Sounds funny but will it work?

I don't what to damage it any worse.

Thanks

With my 2 new RS35 and my Fortes my new family room really rocks. 2ch only at this time.

Cant wait to upgrade the rest.

[What gets replaced when a tweeter is blown in the RF-3IIs?/ How good is Klipsch about giving me new ones?]

Is it worth installing a inline fuse to each speaker to avoid this, say a 3A fuse.

I used to do this with car auido, but what about home?

Thanks

[1985 Forte's with RC-7 / RS-7]

So it sounds like using my Fortes as the 2 front mains is not a good idea

with the rest of the speakers being the Ref. line.

Ideal would be using my 2 Fortes as front mains.

RC-7 or RC-35 center

RS-7 or RS-35 Side surrounds

RW-12

and the RCW-5 in the rear.

Would this setup disapoint me?

or should I retier the Fortes to the basement and get the RF5 or 7's????

[1985 Forte's with RC-7 / RS-7]

High, Must say I love this form, here almost every day.

I've got a pair of 1985 Forte's, and was wondering how thay will match

up with the RC-7 / RS-7 / RW12 / and RCW-5.

Just finishing the new 17x20 HT / family room.

Going Klipsch all the way around, just not sure if my old Forte's will

match up OK.

Thanks