sox

RichardP, Thank you for your response. I believe that those that read my original post concluded as you did that my troubleshooting regimen was comprehensive and there was only one conclusion (i.e. Bad sub). We are trying to get BRANDNAMEZ.COM'S attention (three emails so far and several attempts on their "always busy" phone support number). I have done business with them a number of times over the past two years and have been extremely satisfied. At this point I'm assuming they are understaffed and haven't gotten to me yet. I plan to let all of you know how this comes out. This forum is a great resource; I have consulted it a number of times but I never had anything relevent to say until now. This is an invaluable knowledge base and thanks to all Klipsch lovers for making it so.

I consider opening the unit a last resort. And yes, the LED is lit. There is no external fuse as on my other sub. I guess i'm hoping that I can diagnose the problem without opening it up. Maybe pie in the sky. If I'm unable to get any further with the deductive approach, my next step is to return it to brandnamez.com for replacememt. If they refuse, then I'll consider major surgery. sox

Originally posted in subwoofer forum--posting here also: Helped a friend buy a HT system from brandnamez.com. It included a Denon AVR 884, a pair of RF-25s, an RC-25, a pair of RS-25s, and an RW-10. Price was great, everthing arrived in excellent physical condition. Everything works great except I cannot get output from the RW-10. I changed connections starting with the LFE single cable input; then tried the single to dual cable; and tried connecting it with speaker wire from the "B" speaker output (setting SW= NO in the receiver setup). No joy. I connected another SW to the LFE port of the receiver and it fuctioned OK so I think I have eliminated the receiver??. I was careful to adjust the receiver setup parameters, first identifying the front speakers as large, then as small, changed the crossover frequency, with no apparent improvement. The sub powers up OK, and it looks perfect. My question: Before I go thru the hassle of returning it for a replacement, is there something I have missed? If not, is there someone who knows the person a Klipsch who might walk me thru some troubleshooting exercises. I feel bad advising my friend into this situation but I'm here. I am a longtime klipsch owner but that's another story. Help?--------sox

Helped a friend buy a HT system from brandnamez.com. It included a Denon AVR 884, a pair of RF-25s, an RC-25, a pair of RS-25s, and an RW-10. Price was great, everthing arrived in excellent physical condition. Everything works great except I cannot get output from the RW-10. I changed connections starting with the LFE single cable input; then tried the single to dual cable; and tried connecting it with speaker wire from the "B" speaker output (setting SW= NO in the receiver setup). No joy. I connected another SW to the LFE port of the receiver and it fuctioned OK so I think I have eliminated the receiver??. I was careful to adjust the receiver setup parameters, first identifying the front speakers as large, then as small, changed the crossover frequency, with no apparent improvement. The sub powers up OK, and it looks perfect. My question: Before I go thru the hassle of returning it for a replacement, is there something I have missed? If not, is there someone who knows the person a Klipsch who might walk me thru some troubleshooting exercises. I feel bad advising my friend into this situation but I'm here. I am a longtime klipsch owner but that's another story. Help?--------sox