Boris Pasternak

Hi William, I would like to thank you for the vast information on the many clubs formed around Klipsch. The number of messages received because of this shows a lot of interest in this information. Regards, Boris P.

I Triode Pete. First I would like to thank you for your interest in my fledgling project. As stated in my first thread, my basic idea in forming K.O.G. was to find out about other Klipschorn owners, especially in my area. To answer your question all I need is your name, location and serial numbers from your speakers. I am at present, working on a parchment presentation certificate suitable for framing, that will include the above information. I would like to thank Groomlakearea51 for the idea of the certificate. Regards, Boris P.

Hi Peteoz77, I have not looked at the plans in many years, but I will find them. I would love the chance to build another set of Khorns. I would love to be in your situation with two complete sets of drivers to start from. Maybe I should start a small home Hobby to convert LaScals's into Khorns. As you may not know, there are two processes in the construction of a Khorn, First, is the very accurate cutting of all the many parts, each one a different size with many different angles. The second is to accurate assembly of all these many parts into a finial product. My plans give the sizes and angles of all the parts only. The best assembly manual I have found so far was many years ago from a company called Speakerlab. I also had a copy of that manual along with my plans. Both of witch to find. Will be in contact with you at that time. Regards, Boris

Good Afternoon All, In addition to forming Klipschorn Owners Guild or K.O.G. in Klipsch Website-forums, I would also like to hear fron any one out there whom have built their own Klipschorns. Years ago I came upon a Klipschorn beside a luger bid after fire badly damaged the building it was in. The unit had been water soaked and damaged when a beam fell on it, destroying the top hat and drivers. I had not ever planed to rebuild it, my plan was to completly disassemble the bass bin, measure all parts, draw up blueprints and fabricate each part anew. I build two horns for people after that. All internal drawings and sizing you get from any source can be questionable, working from an actual factory built speaker unit you are sure you will end up with an exact reproduction. Regards, B. Pasternak

Would like to form Klipschorn Owners Group or K.O.G. See See Klipsch Forum below for info. Regards, B. Pasternak