rlmerrell69

Hmm, you make a good point there. I'll look at the 12'' plans for the Tuba if I could understand the plans well enough to see what measurements I need for a 12inch. If I decide to go with this plan, I may still stick with the 15''. I'd like to get acquainted with my low skill levels before trying to perfect a 12 incher. I just thought of a crazy question, wall mounting a Tuba? Then make floating shelves between the tubas(if I mount them on the front walls only) but not touching the Tubas. One massive wall-mounted entertainment system. I'm from Texas, very south tip of Texas. Thanks for the link, i'm going over it now.

My current setup in progress: Receiver: Onkyo TX-RZ810 Fronts: RP-8000F Center: RC-62ii Rears(Working on getting these): RB-81ii or RP-600M otherwise i'm using my Quintet speakers Subwoofer: SW-112 Reference Series I've been checking them out, it seems pretty reasonable. But it also seems real fun building it myself. Hmmm, my leaning meter is still right smack in the middle for Marty Subs or Tuba HT.

Good day everyone, After giving it a lot of thought, I pulled the trigger on plans to build a Tuba HT Sub... BUT... Then continued to read the forms here and there. I've never done any testing or heard how these 3 subs listed in the title perform and compare. I started to wonder, what the opinions of those here and there think about the differences between the subs and how they perform? I'm a 85% movie 15% music person. So really feeling John Wick's pistol bang gets me thrilled. Feeling my seat vibrating from the opening scene of Prometheus takes my breath away. I couldn't help but to wonder what the experience is like for those who own these subs? I know I can't use my room size and ears to match with someone else that has experience with these subs. Everyone has different ears and room sizes. The question I have is, Which sub gets me the that bang form John Wick and seat shaking from Prometheus? I don't think the DA Sub Kits would get me that, considering the price for one of those is a bit higher than the Full Marty or Tuba HT and they're sealed. I suppose it's a battle between the Full Marty and Tuba HT? Space isn't really an issue, cost is a considerable factor. Also, I can't find any build plans for the Marty Subs. I have included pictures and dimensions as best as I could. I haven't met anyone near me who may have built these subs to hear them. I live in the corner south tip of Texas(RGV). I'd like to hear thoughts, opinions and or suggestions! I'm pretty curious. My current setup in progress: Receiver: Onkyo TX-RZ810 Fronts: RP-8000F Center: RC-62ii Rears(Working on getting these): RB-81ii or RP-600M otherwise i'm using my Quintet speakers Subwoofer: SW-112 Reference Series Note: Movies listed are just references. I have a circular saw, i'm curious if it may be better to buy a flat pack and glue it together. Those Marty Sub flat packs are pretty considerable by the price compared to buying a couple more tools and cutting it myself. Although, I wouldn't turn down gaining some wood-working'ish experience.

Have you tested the parts express kits? How well do they run compared to a Tuba HT? Originally I liked the 18inch subwoofer flatpack parts express has. Then I saw the Full Marty-Sub and liked what I saw on 'paper' and youtube reviews. Now I ran into the Tuba HT and really curious if it's really that good. I don't mind doing a Tuba as I have plenty of height space at the front wall and back wall. If you don't mind me picking at your brain a little, why near-mid? If I can't place my towers and Tuba where I would want them, I don't mind laying it down acting as a 'table' in the front mid and rear mid. Moder receiver specs sometimes overwhelm me. At the time of cranking, I only have the L and R channels connected. So the Onkyo TX-RZ810 should have had plenty of power to drive the RP-8000Fs I have. As for the matching speakers, you're suggesting I get towers or at least RP-600Ms for my rears?

Haha! Yes! Thanks for catching that. Maybe I really should have bought a Denon? Thanks for the compliment.

I went with the Tuba HT and Tuba HT Low Profile(even though it's 6ft tall). I'm thinking of making 2 of the LP ones and make them look like pillars. I'm wondering why point the port towards the wall and not towards the viewer? Maybe it doesn't matter? Anyhow, many questions for these subs. That will be for their form and for me to read through all the threads to try answering the questions on my own.

i just bought 2 plans from bill. It will be a journey!

I love it! Sounds like efficient quality bass for a great price. Maybe, if anyone hasn't done it, i'll build a Full Marty Sub and a Tuba HT and compare. It will be quite some time before I get to that point though. As you can see the home is still being renovated. On another topic but related, not sure if I should create a new thread for it but we'll see. The time I did raise the volume on my pair of RP-8000F to reference levels... They didn't sound that great as I assumed they would. Maybe they haven't been broken in? I've had them for a couple months but never played them past 65(on the 0 to 98 scale?). OR could it be the receiver I got, I have regrets on it. I got the Onkyo TX-RZ810 and it says 200 W/Ch (6 Ohms), 130 W/Ch (8 Ohms) but only gives the option for 4ohms or 6ohms. The manual says to leave it at 6ohms as it serves both 6 and 8 ohms... But being a first timer using this brand, i'm skeptical because on the site it literally lists 8ohms. And this ARC feature breaks after a couple days. My Yamaha RX-V377 is 8ohms and really goes well with my Quintet system. I can almost admit it sounds better than this Denon trying to power these RP-8000F towers. I'll also add these are the only speakers connected to the Denon at this time. Maybe i'm over-driving it?

I'm pretty handy, the difficulties are trying to cut a straight line and within measurements. I saw some flat packs for the Full Marty Sub. I think the cost for the amp, sub and box would be about $800 range. For 2 sets and 1 amp it's about 1500. I see the THT Box (Tuba HT) looks like it tops the Marty Sub and cheaper? Doesn't really recommend a amp to go with it though.

Excuse the renovations. Here is what the room looks like. I forgot to measure. I can get those later today.

Nice! I thought they would be a good fit considering the woofer size. I just bought a RC-62 ii for a decent price. I hope it's in the great condition they claimed it to be. There was a pair of RB-81 ii for $200 fantastic condition. Unfortunately it the guy didn't want to ship them and I couldn't drive fast enough(about 350 to 400 miles away) to ****** them before someone else could. The only concern I had about the RB/RC/R? series is the tweeter. Me and a group of friends enjoy reference sound levels so I feel confident with the advice from y'all and Klipsch this will sound awesome and hold up with reference levels. And if it doesn't, well I can always sell them and get matching RP speakers.

I'll get on my computer. The picture isn't posting, unless I'm blind.

So, I should go with the RC-62 ii and RB-81 ii? Here is a picture of the living room. It's still under renovations.

Hey Wvu80! Appreciate the reply! the front wall is closed, the back wall is closed. I imagine the seating arrangement won't be against the wall. So there would be some space between the back wall and the back of the couch/sofa but not a whole lot. I'm a little 'confused' as far as the Klipsch line-up goes. I see the R-28F and the R-820F then we have the RP-280F and RP-8000F. It makes sense that Reference Premier is a more premium line-up. But then there's the other Reference line-up with RC-62 ii and RC64 iii, RS-62 ii and RF-61 ii. Is this other Reference Line-up a higher quality than the RP line-up? On paper it looks to be more premium. But i'm not sure when it comes to hearing them in person? I see you have the RC-64 iii and that thing must really blow things away according to it's specs. This is why i'm considering the RF-61 ii for my rears, then I come to think they're almost 10 years old and Klipsch, i'm sure, will be updating those soon. I'm even considering the RC-62 ii for my center as well. Then there's also the price, they're cheaper than the RP speakers in the open-box, used market. It's difficult for me to choose as the dealers around here absolutely SUCK. I've gone to 3 of them and their setup is complete crap. The sound matrix is not correct, the settings are totally out of this world and well they are, in the fullest sense of the word, clueless about HT products and setup.

Good day everyone! I just moved to a home and trying to figure out how to setup and complete the Klipsch system. The living room is open to the dining and kitchen, and at the end. So it's got 3 walls where the 4th is what's open to the dining and kitchen. There is a sliding door to the patio and 1 large window. The ceiling is slanted, back side being about 8ft and the front site is 12ft much higher. I still do have my Quintet 5.0 system with a 12 inch sub. I was planning on putting all matching speakers with my RP-8000F towers but not sure if it's reasonable to use towers for the rear as well considering they're up there in price. I could get away with the RP-600M. But I stumbled on the RB-81 ii, 8 inch woofer bookshelf speaker. I thought this would be a great match to the towers I have. On to the questions! Should I go for the RB81ii or the RP600M for my rear speakers? Or should I get the RP-8000F towers? I have a SW-112 sub-woofer, what would be an upgrade to that? Or should I build my own sub-woofer? I'm considering the Full Marty sub-woofer build. Finally, what do y'all use for acoustic dampening? My walls are bare and one side is tall. Not sure how to tackle making sure acoustic panels are in the proper place. ADDED: On another topic but related, not sure if I should create a new thread for it but we'll see. The time I did raise the volume on my pair of RP-8000F to reference levels... They didn't sound that great as I assumed they would. Maybe they haven't been broken in? I've had them for a couple months but never played them past 65(on the 0 to 98 scale?). OR could it be the receiver I got, I have regrets on it. I got the Onkyo TX-RZ810 and it says 200 W/Ch (6 Ohms), 130 W/Ch (8 Ohms) but only gives the option for 4ohms or 6ohms. The manual says to leave it at 6ohms as it serves both 6 and 8 ohms... But being a first timer using this brand, i'm skeptical because on the site it literally lists 8ohms. And this ARC feature breaks after a couple days. My Yamaha RX-V377 is 8ohms and really goes well with my Quintet system. I can almost admit it sounds better than this Denon trying to power these RP-8000F towers. I'll also add these are the only speakers connected to the Denon at this time. Maybe i'm over-driving it?