[ISO Single KP-250]

hi Ampicar, closest and only listing I've seen is this
https://boston.craigslist.org/nos/ele/d/danvers-klipsch-kp-250-ii-pa-speakers/7459590672.html

[KPT-904 Build]

The front baffle is 25 3/8" wide by 40 1/2" tall.  There is a 3/4" thick casing surrounding the baffle and it protrudes 5/8" outward.

[La Scala (Needs TLC) - Syracuse, NY - $800]

https://www.facebook.com/marketplace/item/350369210439249/

[SOLD *Brand New* Topping PA5 Amplifier For Sale *SOLD*]

PM sent 

[KPT-904 Build]

there is one brace between the woofers that spans from front to back.  looks to be at least 1" thick by 3" wide.
   

 

[KPT-904 Build]

Hi Knight,

Here are the measurements (in inches) that I took this evening.  If another member (i.e. Amphicar) could confirm you should be all set.  I tried to be precise when it came to edge to edge, though center of dust cap/port to edge measurement is a little tricky.  Note, these cabinets use some really thick birch!

A. 9.5"

B. 16"

C. 6.25"

D. 14.5"

E. 4.25"

F. 4"

[KPT-904 Build]

On 2/23/2022 at 9:28 AM, Knight2001DTS said:

Hi all

Some great info here!!

 

I have recently purchased some K-45 drivers and would like to do a 904 clone cabinet as well!

 

Is anyone able to provide a measurement for the port diameter and length as measured off an original KPT-904-LF? ( MM if possible please )

 

The rest of the dimensions are already available from spec

 

Thanks in advance!

I recently acquired a pair 904's and 456's.  The port opening is 4" and depth is 3.75".

[Belles $2000, Binghamton, NY]

same seller listed a pair of cornwalls for $2500 as of 4 hours ago:
 

https://www.facebook.com/marketplace/item/473558291083925/