rescueu2 Posted March 18, 2009 Share Posted March 18, 2009 I hope this isn't a silly question, and I know it shows that Im a rookie at all this, but I am at a loss on how these are to be set. The front mains are set to large which seems to be adequate. I tried to run the Ez-Eq thing, but it sounds like crap and all I get done is changing it around. I am running an HK AVR 354. Any suggestions?? Quote Link to comment Share on other sites More sharing options...
darylomer12 Posted March 18, 2009 Share Posted March 18, 2009 What do you mean sounds like crap? What are you hearing that you don't like? Are you using a sub? You did run the auto-setup with the microphone, correct? If your using a sub, set your mains and center to "small" and set your crossover to 80hz. Quote Link to comment Share on other sites More sharing options...
rescueu2 Posted March 18, 2009 Author Share Posted March 18, 2009 Perhaps crap is a poor description. I am using a sub12. I did run the auto set up several times, when it's done the sub is turned off, so I have to go back in and change it. So I'm supposed to set the mains and center to small??? What about the rear surrounds? I am at work now, but I will give it a try in the morning. Like I said, I am a rookie at this so bear with me! Quote Link to comment Share on other sites More sharing options...
darylomer12 Posted March 19, 2009 Share Posted March 19, 2009 So I'm supposed to set the mains and center to small??? What about the rear surrounds? Correct. Try it out and see how it sounds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.