KrisM Posted January 11, 2010 Share Posted January 11, 2010 I need a crossover schematic for a kp-115 sw.. I think mine is faulty cause i cant get much output. Got a gig on sat that I need this speaker for. Can someone help out? Kris in CT Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 12, 2010 Share Posted January 12, 2010 here KP-115.pdf Quote Link to comment Share on other sites More sharing options...
KrisM Posted January 12, 2010 Author Share Posted January 12, 2010 Exactly what i asked for. Thanks Colter!!! Now if i could just fiugure out whats wrong with my KP... I am using the full range input and get little or no volume from a soundcraft powerstation 1200.. The KP is getting about 300 watts from the amp mixer and should be quite loud.. but its not. The only thing i could find was the large cap in the HF out curcuit needs replacing. everything else seems ok.. any thouhgts? Anyone Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 14, 2010 Share Posted January 14, 2010 bypass the xover all together and check the woofer first. check all solder joints visually, sometimes a component works it's way loose. if it's all good use alligator clips and bypass one element of the network at a time to see what's wrong. Quote Link to comment Share on other sites More sharing options...
KrisM Posted January 20, 2010 Author Share Posted January 20, 2010 Silly question colterphoto1.. is the schematic/spec for the kp-1000-cx the same Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 21, 2010 Share Posted January 21, 2010 1000 CX KP-1000-C-SW-X.pdf KP-1000-C-SW-X.pdf KP-1000-C-SW-X.pdf Quote Link to comment Share on other sites More sharing options...
diamonddjs Posted September 14, 2010 Share Posted September 14, 2010 I have a kp 115 , the crossover is bad the resister are heating up hot , it will burn your skin, what could cause this, bad inductor? capacitor Quote Link to comment Share on other sites More sharing options...
djk Posted September 15, 2010 Share Posted September 15, 2010 That's just how hot they run. Under hard use they can easily exceed the boiling point of water. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.