Pani Posted March 3, 2001 Share Posted March 3, 2001 This is my first post here but I've read most of the messages in the archives. I just ordered Khorn plans from Speakerlab and before I start cutting wood, I would appreciate any pointers from those who built Khorns before. Do you guys have any upgrades you can recommend, to make a better enclosure or to make construction easier? I will only use the Khorn bottoms from 300Hz down, I already have horns for the highs. What woofer are you folks using in your Khorns? I don't mind spending more if it is better than the K33E's. Would a McCauley 6342 woofer work in this enclosure? I know someone who thinks highly of this woofer for horn applications but I don't know if it is suitable for the Khorns. http://www.mccauley.com/mainframe.htm Thanks for your help. Pani Quote Link to comment Share on other sites More sharing options...
John Warren Posted March 4, 2001 Share Posted March 4, 2001 this woofer wrong for khorn need Fs low twenties 4 ohm K-33E is good for application mccauly is for musical instruments w/Fs 40Hz carbon fiber cone is good for horn loading high magnetic field is good for horn loading Quote Link to comment Share on other sites More sharing options...
bill rawls Posted March 7, 2001 Share Posted March 7, 2001 Save yourself some grief. Use only the driver the design calls for. There are too many variables involved in enclosure design to change driver parameters. An enclosure is a critically tuned device and any deviation changes the entire design. Regards, Bill Rawls Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.