FranklinCawen Posted January 24, 2011 Share Posted January 24, 2011 Aloha! Just pondering some speaker placement options ... I've got split LSI speakers (pre-aluminum trim) and I've looked through the forum trying to see an example of the HF section mounted separately from the LF bin. Was there a specific way this was done - did Klipsch make any type of mount for example? Usually I've seen the HF sections simply stacked up if the rig was pretty jumbo. I'm sure I could cobble together something that would work, but if I had a photo or someone's experience to draw on, that'd be a great help. Thanks!__________________________ mother of the bride dresses discount wedding dresses mother of the groom dresses Quote Link to comment Share on other sites More sharing options...
Guest " " Posted January 24, 2011 Share Posted January 24, 2011 The LaScala tops are not designed to be flown by top or side hanging methods. You could probally get away with it using a hung shelf method and having the tops bolted to the hung shelf. If you didn't get the impression....you should know that hanging the tops is not a very popular way of using these speakers. The LF section is too closely coupled into the coverage of the HF section to have them placed significantly apart from each other. Shelf haning both the HF and LF section together, with a floor coupled KP-480 sub woofer makes more sense. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.