fyrpwr Posted April 10, 2011 Share Posted April 10, 2011 Hi, Does anyone have the network drawing for the internal crossover ? Thanks Steve Quote Link to comment Share on other sites More sharing options...
Guest " " Posted April 10, 2011 Share Posted April 10, 2011 I know I have seen this on the forum. I it is the same as the kp-4000. im holding one in my hand. the crossover is not complex. from input to the woofer is a 6mh inductor. from input back out to the remote speakers is 2 100uf caps in parallel making up a 200uf value. across the woofer is a zobel circutt consisting of a 73uf capacitor in series with a parallel set of 50ohm resistors which makes up a 25 ohm load. a basic 6db per octave xover. the caps are150v electrolytic so they have to go since they feed the mains. film caps would be better. Quote Link to comment Share on other sites More sharing options...
fyrpwr Posted April 11, 2011 Author Share Posted April 11, 2011 Fritz, Yes, They are the same. Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted April 11, 2011 Share Posted April 11, 2011 here ya go Steve KP-480.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.