cbope Posted August 19, 2011 Share Posted August 19, 2011 So, I picked up my new Reference speakers yesterday and hooked them up immediately. However, I noticed when unpacking them that a few of the small magnets that hold the grilles to the speaker cabinets are slightly loose. They don't come off, but they can be moved in and out of their holes several millimeters. I'm concerned this will vibrate at certain frequencies. Should I put a drop of superglue at the base of each magnet to lock them in place, or is this not a concern? Has anyone else found this on their Reference speakers? To be honest, I was a bit surprised at this as the build quality otherwise seems be excellent. Quote Link to comment Share on other sites More sharing options...
JasonJCarney Posted August 19, 2011 Share Posted August 19, 2011 I think maybe they are suppossed to be loose. I'll look at my rf63's today and see if they are loose. Quote Link to comment Share on other sites More sharing options...
cbope Posted August 19, 2011 Author Share Posted August 19, 2011 I don't think they should be loose, only 1 or 2 per speaker are like this. The others seem to be firmly attached to the frame and do not move at all. Quote Link to comment Share on other sites More sharing options...
JasonJCarney Posted August 19, 2011 Share Posted August 19, 2011 Checked my rf63's today...they are not loose at all. So the answer is they should be tight. Quote Link to comment Share on other sites More sharing options...
cbope Posted August 20, 2011 Author Share Posted August 20, 2011 Thanks Jason. I think I will wait and see, so far I have not noticed any noise or vibration. If it does appear a drop of superglue seems like it will do the trick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.