kag4me Posted April 1, 2013 Share Posted April 1, 2013 Hello, I'm wondering if anyone has built cabinets for a pair of R-5800's and would be willing to share internal volume sizes? sealed? vented? If not, anyone know the T/S parameters so one can be designed up? I am wanting to do a custom installation for myself and want to get the best sounds from these as I can. Quote Link to comment Share on other sites More sharing options...
lo123 Posted April 2, 2013 Share Posted April 2, 2013 Try this post, provides a method for cavity treatment using R-5800's originally described by Michael Coulter. Working great for me. http://community.klipsch.com/forums/thread/1753222.aspx Quote Link to comment Share on other sites More sharing options...
Mongo171 Posted April 3, 2013 Share Posted April 3, 2013 Aren't these supposed to be infinite baffle with no cabinets? Quote Link to comment Share on other sites More sharing options...
kag4me Posted April 3, 2013 Author Share Posted April 3, 2013 Well, seems to me the cavity in the wall effectively becomes the cabinet. Your wall may be different than my wall therefore the internal cavity volume may be different. Therefore the sound repro from these two walls is going to be different. Then one needs to account for resonance of the wall itself. In my case, when I finished my walls, I specifically hung ½“ sheetrock versus the standard ¼” for the walls that these are mounted in. My intention was to add that (slightly) additional rigidity to minimize resonance. Additionally, before hanging my sheet rock, I built internal cabinets with bracing to further minimize wall vibrations (modeled after B&W 802’s). I used adhesive to bond the sheet rock to the internal bracing to further reduce wall resonance. Conceptually, this worked great. However at that time (years ago) I was not as aware of determining internal volumes therefore my install is probably not optimized for this specific speaker. Given a standard 16OC 2x4 framed wall; the internal volume is then ((14 ½ x 3 ½ x 96) / 1728) ~2.82 cuft. Is that optimal for this speaker, probably not. What then if it’s installed on an outside 2x6 framed wall stuffed with insulation? Volume and dampening is significantly different. Maybe I’m way off as I am a novice at acoustics and all the funky mathematics. But I am trying to learn as it is intriguing. Therefore, short of having the T/S parameters to use with some software, I don’t know how to determine the optimal internal volume and dampening so am posing the question…. I did receive an email response from another forum member; s/he indicated a Klipsch Engineer suggested an internal volume of 1.5. Humm….. that’s less than a standard framed wall I mentioned above. Arrrrg. It sucks being a perfectionist sometimes LOL J Quote Link to comment Share on other sites More sharing options...
leftwinger57 Posted April 3, 2013 Share Posted April 3, 2013 I believe your thinking is right on .I personally have no knowledge of these speakers but as an alarm installer who became a Bose installer did use in walls and then used bracket style cubes in walled w/ a grill cover from another speaker mnft. It did work, put aside what you think of Bose right now I'm just talking the feasiblity of putting outside wall speakers in wall and yes it can be done. Also there are other factors as an insulated wall vs an interior wall w/ no insulation.We also put in an internal shelf to hold the cubes and your idea of using adhesive in addition to screws is a great idea. I think your dimensions of sheet rock are wrong .There is 1/2'' and 5/8'' as standard I never heard of 1/4'' sheet rock.... Quote Link to comment Share on other sites More sharing options...
kag4me Posted April 3, 2013 Author Share Posted April 3, 2013 yup, thats right. I used 5/8" on the walls, not 1/2", my bad. But you got the idea. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.