horatio2 Posted October 17, 2015 Share Posted October 17, 2015 For those interested, I have proceeded to open the throats of my bins to approximately 6x13 (5.5x13 net, done purposefully). I have also prepared two more motorboards and fitted these with Eminence Legend CB158's. The motorboards are cut for 6x13. In the next several days, weather permitting, I will be making two types of measurements on these, the first will be establishing the resonant frequency for each bin/driver combination. The second type will be to establish the frequency response. For this, I will be making the measurements outdoors, and will be using REW and a voltmeter measuring across a resistor on the + speaker terminal. Depending on how these measurements go, I may or may not add a set of Kappa 15C's into the mix. The two configurations being compared are: K33E on 3x13 throats, and CB158's on 5.5-6 x 13 throats. 1 Quote Link to comment Share on other sites More sharing options...
boom3 Posted October 25, 2015 Share Posted October 25, 2015 Sorry I don't have Klipsch's 1945 article in soft format. Keep us posted on your results Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.