Greedo12 Posted August 26, 2002 Share Posted August 26, 2002 Hi, I've had the promedia v2.400's almost since they were released a few years ago. I've not had a problem with them. I've recently moved into a new house, and during the first week, we had a huge thunderstorm - since then they have stopped working. No power, or sound at all. I suspect that the control pod and/or amp has blown up. I've tried replacing the fuse, but no joy. These speakers are obviously out of warranty, so instead of coughing up the dough and wasting time on repairs, I'm considering buying a cheap(ish) 5.1 amp to power the satellites. Any thoughts/ideas on suitable models? This is purely for PC use. No need for a sub as I'll be upgrading my HT and using my existing one from there. Thanks for your help! Quote Link to comment Share on other sites More sharing options...
justin_tx_16 Posted August 26, 2002 Share Posted August 26, 2002 youronly problem would be powering the subwoofer. i have all the formaulas worked out on what power you would neeed for the amp, i will try to find it in the 5.1 forum. ------------------ -justin SoundWise promediatech@Klipsch.com /1-888-554-5665 - RA# 800-554-7724 ext 5 s> Quote Link to comment Share on other sites More sharing options...
Greedo12 Posted August 26, 2002 Author Share Posted August 26, 2002 I suspect that the sub was probably zapped during the storm, therefore it'll probably be heading for the garage/dumpster fairly soon I'll just be using the satellites with the receiver, along with the sub from my HT. Any thoughts on suitable receivers that won't overload these little speakers? These are 4ohm right? Quote Link to comment Share on other sites More sharing options...
Prana-Bindu Posted August 26, 2002 Share Posted August 26, 2002 Is there a homeowners/renters policy in effect? Have you made a claim? ------------------ May the bridges we burn light our way.... Quote Link to comment Share on other sites More sharing options...
Greedo12 Posted August 26, 2002 Author Share Posted August 26, 2002 I do have home insurance for the house, however I think that making a claim for this small(ish) amount would not be worth the possible increase in insurance premium - you know how insurance companies work these days! ) If it had zapped my pc at the same time, then yes, I would be on the phone immediately (although not during the next storm) Quote Link to comment Share on other sites More sharing options...
justin_tx_16 Posted August 26, 2002 Share Posted August 26, 2002 ok, here are the posts i have made about this... Receiver 8ohms Impedance ProMedia 4ohms Impedance ProMedia 2.6 Volts per speaker channel Receiver 6.1 Volts per speaker per channel (70 watt receiver) just so you can figure this on your own in the future. Watts to amps. (W x 1.3)/120V=I that gives you Amps=I Amps to Volts V=IxR So, 60 watts times 1.3= 78 (/120)= 0.65 V=0.65x4=2.6V The satellite ratings... 60 Watts .65 Amps 2.6 Volts The receiver ratings per channel... 70 Watts .76 Amps 6.1 Volts Just for fun... 60x5=300Wx1.3>390/120=3.25>x4=13V 70x5=350Wx1.3>455/120=3.79>x8=30.3V You are putting 2.35 times more power into the speakers, potentially. YOu can blow the speakers, whether you will or not, i don't know and can not really say. It all depends on how you use them. If you did not turn them up beyond what you feel is their breaking point, 46 watts out of the amp, then you should be ok. but there is no way to tell when you are at 46 watts on that receiver but tha tis the approximate blowing point. you also have to think about the frequency, the sats can not handle below 150-180hz, what does that receiver cross over at? So, use the formulas i posted above, or just give me the figures of a receiver, or the model would be better, and i will figure if the receiver will work without chancing damage to the speakers ------------------ -justin SoundWise promediatech@Klipsch.com /1-888-554-5665 - RA# 800-554-7724 ext 5 s> Quote Link to comment Share on other sites More sharing options...
Greedo12 Posted August 26, 2002 Author Share Posted August 26, 2002 Hey Justin, Thx for the info. Taking a quick squint on ebay, there's a few Sony receivers going cheap - most range around 8ohm / 100watts per channel, which would mean an early death for the PM satellites if they were driven hard. I'm still wondering about the cost of getting a semi-decent receiver vs the cost of repairing the PM v2.400's vs the cost of upgrading the whole thing to PM5.1/Logitech Z560's. Of course, if I just upgrade, then I'll have the 4 'spare' satellite speakers just sitting around, not doing much. They could always be relegated to duty in the garden I suppose. I've got a complete Klipsch HT setup, so I'm ever-so slightly biased towards the Klipsch sound, and would prefer to stick with them. Either way, I'm not keen (actually I am, but the wife isn't) to spend too much $$$ on the solution to this problem. Any final suggestions before I splash some cash? Quote Link to comment Share on other sites More sharing options...
justin_tx_16 Posted August 26, 2002 Share Posted August 26, 2002 you only need a receiver that can take a digital input and has at least 47 watts of power, all ratings equal. some say 100 when they really are 70, so you have to be careful about that. if i were you, i would save money and get a receiver that is on the cheap but still good enough, pretty much any receiver is, and connect the sats to it and your old ht sub. i know that Technics, Sherwood and teh RCA receivers (the gold and black ones at radio shack) are all great budget receivers. ------------------ -justin SoundWise promediatech@Klipsch.com /1-888-554-5665 - RA# 800-554-7724 ext 5s> Email Me Quote Link to comment Share on other sites More sharing options...
skonopa Posted August 26, 2002 Share Posted August 26, 2002 Here is what you can do. You could try to get a new amp such as this one here on ebay. These amps are extremely easy to replace (unscrew the 8 screws, unhook two wires from old amp, rehook those same two wires to new amp and screw back into place on rear of subwoofer cabinet) and if you find a decent deal, could be cost effective also. I have done this last fall when my amp decided to go south on me and has been working great ever since. ------------------ Steven Konopa Fredericksburg, VA Denon AVR3802 (Receiver) RF-7 (Fronts) RC-7 (Center) RC-7 (Rear) RS-7 (A Surrounds) Infinity RS2000.5 (B Surrounds - recycled) REL Storm III (Subwoofer 1) Yamaha YST-SW40 (Subwoofer 2 - Recycled) JVC XV-S65GD (DVD) Sharp DX-200 (CD - ancient) RCA DWD490RE (DirecTV/Ultimate TV receiver) Sharp 32 inch (TV) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.