albert Posted February 10, 2017 Share Posted February 10, 2017 Hello, I recently picked up a non working Klipsch SUB-10 subwoofer off ebay. Weighs approx. 40 lbs, 17" (H) x 14" (W) x 18.9" (D) inches. The woofer is underneath. These are my first Klipsch front speakers and subwoofer, The external appearance of the subwoofer from eBay, comparing pics online, appears to be a SUB-10, the feet and front are the same. However after removing the input panel there is a part number sticker on the metal plate that holds the inputs and PCB, that reads SW10 120V, C707163314. I've looked at several pics of a SUB-10 input panel online. The input panel I have (labeled SW10) the PCB layout, placement of the caps, high level in & out jacks, transformer, additional pcbs, etc all electronics appear to be identical to the pics of a SUB-10. It appears the factory mislabeled the input panel. The SW10 is rated at 100 watts (uncertain of the peak) and the SUB-10 is rated for 200 watts FS (around ~500 watts peak) The SW10 input pcb panel I have appears to be identical to a SUB10 input pcb input panel from the links below. SUB10 input panel PCB SUB10 p/n sticker Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.