Jump to content

R-10SW Frequency


Recommended Posts

125hz if using shelf mode

80hz in flat mode


Gain is how loud you are setting the sub.  It sends more or less signal to the sub overall i.e. if you cross at 100 everything under 100hz is raised or lowered with that gain knob.


The crossover sets where the sub begins to cut off.    If the bass is very thin in a spot or bloated but just in one area...you should raise or lower the crossover to get a smooth flat response.  A mic measures this best but your ear can be sharp too.  


All the above assumes you are not using an avr.  If you do, set the crossover on the sub to max and use the avr to set it as i mentioned above.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...