alkemyst Posted July 25, 2023 Share Posted July 25, 2023 Format is in the speaker type, (what I think the crossover should be), and then what the speaker is rated +/-3dB to. I have been told to put all speakers at the "small" setting. Not sure if my front stage is better left full range/LFE+Main. I have been reading and see that a crossover should be set around where the speaker is -3 to -6 dB. I want to get it to some baseline and then play with the UMIK-1 and REW I just picked up. Mostly just going to room correction/level matching as I have nothing I can upload a correction file to. My room measurements are: 9' TV dist 8.5' seat to center 9' main speaker width 10x12 room Low Pass Chorus II (full-range or 40) 39Hz Academy (60 or 80) 65Hz RP-500SA (150 Klipsch recommended) not listed RP-250S (60 or 80) 58Hz High Pass SPL-120 (125Hz) 24-125Hz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.