Markyboy Posted September 20, 2004 Share Posted September 20, 2004 I finally finished the two custom cabinets. I made them large enough that when flanking the TV they are tall enough that I can one day make a bridge between the two to put the center channel on. CP- I went with your suggestion about tight fitting the shelf and opening the back. I made the dimension of the "compartment" just slightly larger than the speaker and then lined it with that gray acoustic egg crate-like material. After a little trimming, the speaker fit fairly tight. I also cut the back of the compartment completely open and lined the rest of the compartment with the same material. I tested the speakers' new home using "Master and Commander". I found that there was very little difference in sound quality but I gained some separation across the front b/c the mains are now a bit farther apart than they were before. Thanks to all those that provided their ideas. Quote Link to comment Share on other sites More sharing options...
john4618 Posted September 20, 2004 Share Posted September 20, 2004 Pictures ??? Quote Link to comment Share on other sites More sharing options...
Markyboy Posted September 20, 2004 Author Share Posted September 20, 2004 I will try to get pics up this week. I've not attached anything on this bb before so bear with me if I mess this up later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.