Jump to content

Pre-amp for monos (500$ range)


doctorcilantro

Recommended Posts

Line from As Good As It Gets movie:

When Helen complains about Jack Nicholson, why cant I just have a normal boyfriend?

Her mother pops her head around the corner and says:

We all want that dear, it doesnt exist!

2.gif

Link to comment
Share on other sites

good movies aside...anyone had any experience with a NAD C162

Specifications:

Phono Inputs

Input impedance (R and C) MM F500k ohms + 320pF

MC 100 ohm + 1nF

Input sensitivity MM 2.10mV MC

MC 115microV

Input overload at 20Hz/1kHz/20kHz MM 20mV / 230mV / 2V

MC 1.3mV, 12mV, 110mV

Signal/Noise ratio MM 80dB ref. 5mV

(A weighted w/cartridge)

MC 81dB ref. 0.5mV

(5V rms at Tape out) MM/MC <0.03%

RIAA response accuracy MM, MC ±0.4dB

Line Level Inputs (CD, Video, Tuner, Tape1, Tape2, Aux)

Input impedance (R and C) 500k ohms, 320pF

Input sensitivity ref.0.5V 150mV

Signal/Noise ratio, A weighted ref. 0.5V >100dB ref. 0.5V

Frequency response, (-3dB 3Hz - 70kHz) ±0.2dB

Voltage gain (Max Volume) 10.5dB

THD . <0.01%

Maximum i/p level 17V

Line Level Outputs

Output impedance Pre Out 75 ohms

Tape Source Z + 1k ohms

Headphones 100 ohms

Maximum output level Pre Out 15V (IHF Load)

Tape 15V (IHF Load)

HeadPhones 190mV into 8 ohms

Controls (Volume Setting @ 12:00 position)

Treble ±5dB@ 10kHz

Bass ±5dB@ 50Hz

Physical Specifications

Dimensions (WxHxD) 17 1/8 x 3 1/8 x 11 1/4 435 x 80 x 285mm

Net Weight 10.6lbs 4.8kg

Shipping Weight 13.2lbs 6.0kg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...