Jump to content

KSW-10 Subwoofer Issues


willieb

Recommended Posts

All,

The power LED on this subwoofer remains on at all times. If I have the switch set to auto should I expect that light to go out?

Also, my amplifier only has one output for the subwoofer so I am using a y cable from

radio shack to be able to plug in to the back of the subwoofer. Is there a quality cable that I can purchase somewhere?

Thanks...

Link to comment
Share on other sites

----------------

On 2/10/2005 5:32:00 AM willieb wrote:

All,

The power LED on this subwoofer remains on at all times. If I have the switch set to auto should I expect that light to go out?

Also, my amplifier only has one output for the subwoofer so I am using a y cable from

radio shack to be able to plug in to the back of the subwoofer. Is there a quality cable that I can purchase somewhere?

Thanks...

----------------

on the auto mode the led should turn red into 15 minutes.

for the Y cable, you don t need to use both of the rca plug.

when you use the two you have a 6db increase on the signal coming to the sub, so it plays louder.that s all.

i ve made my sub cable my self, it s not very beautifull but it sounds good.2.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...