Maxer Posted July 29, 2006 Share Posted July 29, 2006 My front left speaker stopped playing back sound. I swapped the cables and the speaker and the problem is not with the speaker (it works fine on the front right) nor with the cable (if I swap positions so the cable goes to the front right output port the speaker and cable work fine). So it seems that the spring clip output that the cables for the front left speaker plug into (in the sub/amp) is not sending out any signal. Is there any way I can repair that or is this is a common problem? Perhaps I can redo one of the connections inside the subwoofer/amp assembly? Thanks! Quote Link to comment Share on other sites More sharing options...
rsbalucas Posted September 15, 2006 Share Posted September 15, 2006 I have the exact same problem. How can we fix??? Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted September 15, 2006 Moderators Share Posted September 15, 2006 The most common cause of one channel being out is a loose connection to the soundcard. Please remove the two cables from the soundcard and plug them back in firmly. If you still have a channel out, switch the cables in the soundcard to see if the problem stays with the front speaker, or if it moves to the rear. If it stays in the front, the problem could be with the volume control module or the subwoofer output. If the problem moves to the rear, then there's a channel out in your soundcard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.