JoergGerbracht Posted June 29, 2007 Share Posted June 29, 2007 Hello, first sorry for my english, I am from germany ;-) My problem: I have bought a Heresy I from ebay. yesterday I open the heresy to take a look inside because I planed to upgrade the crossover and cables. In the past someone has done nasty things with the Heresy. The crossover was cast in something like concrete! Additional there was a lot off mineral wool inside the body. So I must build a new crossover. I have found here the diagram for the crossover, esteblished about a inductor 2,5mH 12 AWG, 2 condenser 2uF and a transformer T2A. Is there any alternative to use normal inductors instead of the T2A? Best Regards Joerg Quote Link to comment Share on other sites More sharing options...
BEC Posted June 29, 2007 Share Posted June 29, 2007 Joerg, Welcome to the Klipsch forum. Your options to replace the T2A would be either the 3636 or the 3619 autotransformer. I can supply either of those to you. Send me an email. Bob Crites bobcrites@mac.com Quote Link to comment Share on other sites More sharing options...
Guest " " Posted June 29, 2007 Share Posted June 29, 2007 JoergGerbracht the device is an autoformer....not an inductor....there are numerous autoformers avail...but for your purposes....I would go with Bob's recomendations. Quote Link to comment Share on other sites More sharing options...
JoergGerbracht Posted June 30, 2007 Author Share Posted June 30, 2007 @speakerfritz Thanks for your statement, thak was my mistake ;-) @ Bob You have Mail ;-) Joerg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.