codyaaron2

I have read some of the post about mounting the RS-52s, and they say that they use the Omnimount brackets. My question is the Klipsch web site says the mounting keyhole bracket is a dual 1/4"-20 thread insert. And the Omnimount bracket says it has a main shaft 3/8"-16 thread shaft. How does this work. I just want to make sure I get the right bracket the first time. Klipsch web site http://www.klipsch.com/products/details/rs-52.aspx Omnimount http://www.ultimateelectronics.com/shopping/product/detailmain.jsp?itemID=3704&itemType=PRODUCT&iProductID=3704 Thanks

I recently purchased the RF-82's and now I am looking for a AVR for my HT. I found a NEW DENON AVR-2307CI on E-bay for $634.84 delivered. Will this receiver do the job for the price or is there a better option for the money? I mostly use my system for movies. Thanks

Frequency Response? RS-52 Specifications frequency response 62Hz-23kHz +/-3dB RS-7 Specifications frequency response 58Hz-20kHz ±3dB Which is better? 62Hz-23kHz +/-3dB or 58Hz-20kHz ±3dB. For HT what kind of frequency response are you looking for. Is the lower the number the better? If this is true them would you get the RS-7, RF-7 and the RC-7 speakers instead of the RF-82 Home Theater System. Thanks

I primarily use my HT for movies. Every now and then I will listen to music, but I want my movies to sound good. Thanks

PB12-NSD/2 vs PB12-NSD It seems reading this forum that some think that SVS makes better Subs than Klipsch for the money. I was just wandering between these two which one would you purchase? Someone here at work thinks that the PB12-NSD/2 might be over kill. The room is 19' X 18'. Do you think that the PB12-NSD would do just fine or is it worth spending the extra $300 and get the 2 12". PB12-NSD/2 = 1-12" PB12-NSD = 2-12" Thanks

Does anyone have any suggestion on which Sub you like better and why? Klipsch RSW-10d vs SVS PB12-NSD/2 Or maybe even a suggestion of another model that they might like better. My DAD has the Klipsch model and it sounds good in his room but I have not heard the SVS model. But I have read about the SVS in this forum and people say that you can get a better Sub than a Klipsch. Thanks

Nothing yet but that system comes with the RSW-10d Subwoofer. Would you recommend something else? I have heard that the SVS are a better Subwoofer than the Klipsch Subs. True or not?

Which Denon will do the job for the RF-82 Home Theater System. There is almost 30 Denon receivers to chose from, actually less because I dont have an unlimited bank account if you know what i mean. I would like to spend around $500 or so if possible. I do not have and hdmi imputs at this time so that is not a necessity. I just want something that will have enough power for the RF-82 Home Theater System. I dont want to get a receiver that will not push the speakers and be unhappy. I use my system mostly for movies and watching TV. I listen to the radio and music very little, mostly for movies. Thanks

I was looking at getting the RF-82 Home Theater System but my wife does not like the size of the speakers. The in wall surround speakers do they sound anything like the RF-82 Home Theater System. I know that is probably a silly question but I have to ask. Is there a good in wall system that will do the job. I guess money wise the in wall system would probably be a little cheaper right or wrong? If someone here has the in wall surround sound system and could give me a little heads up on weather or not they would go in wall or the big speakers please let me know. I use to have a bose surround system I know bose sucks but my wife liked the size of the speakers and I told her that i would check on how the in wall speakers sounded but i do not want to regret getting the in wall later down the road. Thanks

I'm looking at getting the RF-82 Home Theater System. Will the Denon avr-2805 do the job? I found one of ebay for $82 with 3 days left and $30 shipping. What would a good price for this receiver be? Thanks again

When I purchase a receiver what is the Min. watts per channel I should get? I was thinking at least 100 watts per channel, is this enough? If a receiver says 100 Watts x 7 Channels Power Output (8 Ohms, 20Hz to 20kHz, .08 THD) will you get more watts if you only have a normal 5 speaker surround sound system? Would you get 140 watts per channel? Thanks

I am new to all of this stuff first of all. If i get a receiver that says 75 watts per speaker and I have a Carver 500 wat amp can I use the carver amp to boost up the watts per speaker? Thanks

What options or specs should I be looking at when buying a receiver? Here are the specs for the harman Kardon. Stereo Mode Continuous Average Power (FTC) per Channel : 65 Watts per channel, 20Hz 20kHz, @ <0.07% THD, both channels driven into 8 ohms Seven-Channel Surround Modes, Power per Individual Channel, All Channels Operating at Full Power : Front L & R Channels : 50 Watts per channel @ <0.07% THD, 20Hz 20kHz into 8 ohms Center Channel : 50 Watts @ <0.07% THD, 20Hz 20kHz into 8 ohms Surround Channels (L & R Side, L & R Back) : 50 Watts per channel @ <0.07% THD, 20Hz 20kHz into 8 ohms Input Sensitivity/Impedance, Linear (High-Level) : 200mV/47k ohms Signal-to-Noise Ratio (IHF-A) : 100dB Surround System Adjacent Channel Separation : Dolby® Pro Logic® I and II : 40dB Dolby® Digital : 55dB DTS® : 55dB Frequency Response at 1W (+0dB, 3dB) : 10Hz 130kHz High Instantaneous Current Capability (HCC) : ±35 Amps Transient Intermodulation Distortion (TIM) : Unmeasurable Slew Rate : 40V/µsec FM Tuner Frequency Range : 87.5 108.0MHz Usable Sensitivity : IHF 1.3µV/13.2dBf Signal-to-Noise Ratio : Mono/Stereo 70/68dB Distortion : Mono/Stereo 0.2/0.3% Stereo Separation : 40dB @ 1kHz Selectivity : ±400kHz, 70dB Image Rejection : 80dB IF Rejection : 90dB AM Tuner Frequency Range : 520 1720kHz Signal-to-Noise Ratio : 45dB Usable Sensitivity : Loop 500µV Distortion : 1kHz, 50% Mod 0.8% Selectivity : ±10kHz, 30dB Video Television Format : NTSC Input Level/Impedance : 1V p-p/75 ohms Output Level/Impedance : 1V p-p/75 ohms Video Frequency Response : Composite and S-Video : 10Hz 8MHz (3dB) Component Video : 10Hz 100MHz (3dB) HDMI : Audio and video processing General Power Requirement : AC 120V/60Hz Power Consumption : 65W idle, 540W maximum (7 channels driven) Unit Dimensions : Width : 17-5/16" (440mm) Height : 6-1/2" (165mm) Depth : 15" (382mm) Carton Dimensions (W x H x D) : 21-7/8" x 10-1/2" x 18-5/16" (555mm x 266mm x 465mm) Unit Weight : 30 lb (13.6kg) Shipping Weight (System, Accessories, Packing) : 35 lb (15.9kg) Thanks

Does anyone here use Harman Kardon? Or is Denon or Yamaha better, or maybe another brand. Thanks for any help