codyaaron2

I have read some of the post about mounting the RS-52s, and they say that they use the Omnimount brackets. My question is the Klipsch web site says the mounting keyhole bracket is a dual 1/4"-20 thread insert. And the Omnimount bracket says it has a main shaft 3/8"-16 thread shaft. How does this work. I just want to make sure I get the right bracket the first time. Klipsch web site http://www.klipsch.com/products/details/rs-52.aspx Omnimount http://www.ultimateelectronics.com/shopping/product/detailmain.jsp?itemID=3704&itemType=PRODUCT&iProductID=3704 Thanks

I recently purchased the RF-82's and now I am looking for a AVR for my HT. I found a NEW DENON AVR-2307CI on E-bay for $634.84 delivered. Will this receiver do the job for the price or is there a better option for the money? I mostly use my system for movies. Thanks

Frequency Response? RS-52 Specifications frequency response 62Hz-23kHz +/-3dB RS-7 Specifications frequency response 58Hz-20kHz ±3dB Which is better? 62Hz-23kHz +/-3dB or 58Hz-20kHz ±3dB. For HT what kind of frequency response are you looking for. Is the lower the number the better? If this is true them would you get the RS-7, RF-7 and the RC-7 speakers instead of the RF-82 Home Theater System. Thanks

I primarily use my HT for movies. Every now and then I will listen to music, but I want my movies to sound good. Thanks

PB12-NSD/2 vs PB12-NSD It seems reading this forum that some think that SVS makes better Subs than Klipsch for the money. I was just wandering between these two which one would you purchase? Someone here at work thinks that the PB12-NSD/2 might be over kill. The room is 19' X 18'. Do you think that the PB12-NSD would do just fine or is it worth spending the extra $300 and get the 2 12". PB12-NSD/2 = 1-12" PB12-NSD = 2-12" Thanks

Does anyone have any suggestion on which Sub you like better and why? Klipsch RSW-10d vs SVS PB12-NSD/2 Or maybe even a suggestion of another model that they might like better. My DAD has the Klipsch model and it sounds good in his room but I have not heard the SVS model. But I have read about the SVS in this forum and people say that you can get a better Sub than a Klipsch. Thanks

Nothing yet but that system comes with the RSW-10d Subwoofer. Would you recommend something else? I have heard that the SVS are a better Subwoofer than the Klipsch Subs. True or not?

Which Denon will do the job for the RF-82 Home Theater System. There is almost 30 Denon receivers to chose from, actually less because I dont have an unlimited bank account if you know what i mean. I would like to spend around $500 or so if possible. I do not have and hdmi imputs at this time so that is not a necessity. I just want something that will have enough power for the RF-82 Home Theater System. I dont want to get a receiver that will not push the speakers and be unhappy. I use my system mostly for movies and watching TV. I listen to the radio and music very little, mostly for movies. Thanks

I was looking at getting the RF-82 Home Theater System but my wife does not like the size of the speakers. The in wall surround speakers do they sound anything like the RF-82 Home Theater System. I know that is probably a silly question but I have to ask. Is there a good in wall system that will do the job. I guess money wise the in wall system would probably be a little cheaper right or wrong? If someone here has the in wall surround sound system and could give me a little heads up on weather or not they would go in wall or the big speakers please let me know. I use to have a bose surround system I know bose sucks but my wife liked the size of the speakers and I told her that i would check on how the in wall speakers sounded but i do not want to regret getting the in wall later down the road. Thanks

I'm looking at getting the RF-82 Home Theater System. Will the Denon avr-2805 do the job? I found one of ebay for $82 with 3 days left and $30 shipping. What would a good price for this receiver be? Thanks again

When I purchase a receiver what is the Min. watts per channel I should get? I was thinking at least 100 watts per channel, is this enough? If a receiver says 100 Watts x 7 Channels Power Output (8 Ohms, 20Hz to 20kHz, .08 THD) will you get more watts if you only have a normal 5 speaker surround sound system? Would you get 140 watts per channel? Thanks

I am new to all of this stuff first of all. If i get a receiver that says 75 watts per speaker and I have a Carver 500 wat amp can I use the carver amp to boost up the watts per speaker? Thanks

What options or specs should I be looking at when buying a receiver? Here are the specs for the harman Kardon. Stereo Mode Continuous Average Power (FTC) per Channel : 65 Watts per channel, 20Hz 20kHz, @ <0.07% THD, both channels driven into 8 ohms Seven-Channel Surround Modes, Power per Individual Channel, All Channels Operating at Full Power : Front L & R Channels : 50 Watts per channel @ <0.07% THD, 20Hz 20kHz into 8 ohms Center Channel : 50 Watts @ <0.07% THD, 20Hz 20kHz into 8 ohms Surround Channels (L & R Side, L & R Back) : 50 Watts per channel @ <0.07% THD, 20Hz 20kHz into 8 ohms Input Sensitivity/Impedance, Linear (High-Level) : 200mV/47k ohms Signal-to-Noise Ratio (IHF-A) : 100dB Surround System Adjacent Channel Separation : Dolby® Pro Logic® I and II : 40dB Dolby® Digital : 55dB DTS® : 55dB Frequency Response at 1W (+0dB, 3dB) : 10Hz 130kHz High Instantaneous Current Capability (HCC) : ±35 Amps Transient Intermodulation Distortion (TIM) : Unmeasurable Slew Rate : 40V/µsec FM Tuner Frequency Range : 87.5 108.0MHz Usable Sensitivity : IHF 1.3µV/13.2dBf Signal-to-Noise Ratio : Mono/Stereo 70/68dB Distortion : Mono/Stereo 0.2/0.3% Stereo Separation : 40dB @ 1kHz Selectivity : ±400kHz, 70dB Image Rejection : 80dB IF Rejection : 90dB AM Tuner Frequency Range : 520 1720kHz Signal-to-Noise Ratio : 45dB Usable Sensitivity : Loop 500µV Distortion : 1kHz, 50% Mod 0.8% Selectivity : ±10kHz, 30dB Video Television Format : NTSC Input Level/Impedance : 1V p-p/75 ohms Output Level/Impedance : 1V p-p/75 ohms Video Frequency Response : Composite and S-Video : 10Hz 8MHz (3dB) Component Video : 10Hz 100MHz (3dB) HDMI : Audio and video processing General Power Requirement : AC 120V/60Hz Power Consumption : 65W idle, 540W maximum (7 channels driven) Unit Dimensions : Width : 17-5/16" (440mm) Height : 6-1/2" (165mm) Depth : 15" (382mm) Carton Dimensions (W x H x D) : 21-7/8" x 10-1/2" x 18-5/16" (555mm x 266mm x 465mm) Unit Weight : 30 lb (13.6kg) Shipping Weight (System, Accessories, Packing) : 35 lb (15.9kg) Thanks

Does anyone here use Harman Kardon? Or is Denon or Yamaha better, or maybe another brand. Thanks for any help

Does anyone own this model? Harman Kardon 595W 7.1-Ch. A/V Home Theater Receiver Model: AVR-247 If so do you like it? Pros and Cons Im looking at getting the RF-82 Home Theater System and i am looking at this model that I seen at Best Buy today. Is one better than the other between Harman Kardon, Denon and Yamaha Thanks

I am going to build a home theater system little by little. My question is is the RF-82 Home Theater the way to go? I read some post and they say that your speakers sound better if they are from the same series is this true? If so is this a good place to start?

Would you spend alot of money on the receiver or more on the speakers and upgrade the receiver later?

I'm looking for a good home theater receiver for around $500. Maybe a good Denon 7.1 system.

Well i'm having a house built and they are running speaker wires for the rear speakers, so I will need to get them at least or I will have wire hanging from the walls. I thought that most of your sound comes from the center speaker, right or wrong? Also do you buy the sub last? I was think about getting the RS-52's for the rear speakers. Can you hang these on the wall or are they better on stands on the floor in the rear. Thanks

If you dont have all the money right now but would like to start building you home surround system what order should you get your speakers in. Thanks