-
Posts
1817 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by kg4guy
-
-
What would be a good film-foil polypropylene cap to use and what would be a good polysteyrene cap to use as a by-pass?
-
I need a 6.2 and a 39 and could not find that value Auricap so I guess I will look at some other high end caps to find the value I need. Thanks
-
It is a APT-50 Eminence Super tweeter .I made a few pairs for some Heresy 1 's that I rebuilt.They are directional but sound ok for the $75. for the pair of tweeters and the brass plates and they look kind of cool. Not sure if it is the driver Bob uses on his CT-125s
-
The design has Solen caps used with the by-pass caps.What would you replace the Solen caps with?
-
I did read further down that he was not sure if they needed to be there or not.
-
The reason I ask this question is as I stated earlier I am building a pair of ALK crossovers for my Heresy 1's and was wondering why a by-pass 1. uF was being used with the Solen 39 uf and the Solen 6.2 cap in the design of this network.
-
What is the differance between a by-pass capacitor and a regular capacitor in a crossover?. I am building a pair of ALK crossovers for my Heresy's .
-
I have a Monster Cable box that runs multi speakers on one channel.I am running 2 pair of Heresy's,series 1 & series 11, and 2 pair of KG4's. I have found that the KG-4's make up for the lack of bass in the Heresys.I could get another Monster Cable box and run each one with a amp?
-
I have three Crown Com-Tech 200 power amps that I want to combine the power of two.Is this possible or not to connect them together to produce double the watts per channel? I want to connect two of these and use my Kenwood KR 9600 as a preamp. I have one hooked up now but doesn't have the punch as the 160 watts the receiver normally has as the Crown amps are 110 watts only.
-
What can be used to clean the controls on this vintage EQ to get the static out when I am adjusting the frequencies?
-
Did you get those in Ventura I was to late on those and I am in Santa Barbara but glad a member got them . Enjoy
-
08 on the west coast is here!
-
08 on the west coast is here!
-
How do you post photos ?[*-)]
-
Houston we have lift off! Thanks Mike
-
I will give them a go and post results when I get them. Thanks
-
Anyone out there have these in a pair of Heresy1 's ?
-
Is the model # 2510 or 2512? 2510 is a 10 inch?
-
I have a pair of Heresy 11's but not sure I would want to spent that much for the upgrade as I am ok with the tweeter and the mid on my Heresy 1's I was looking for a mod. for the bass only .I have built some cabinets that the Heresy's will slide into and I have my KG-4's on top of them and that is a great help for the lack of bass in the Heresy1's. Thanks
-
What can be done to The Heresy 1's bass to bring it up to the new Heresy 111's bass or get it close?
"Heresy 1 with type E crossover with CT-125 tweeters, K-22's and K-55-M and new caps in the crossover ,Sonicaps"
-
I have left and right.
-
One more question where do I plug the 2 RCA jacks from the power amp into my receiver ?
-
Thanks I did not understand the dotted line when I was looking at my manual at first. Awesome thanks again Dr. W.
-
Yes it is screw down and I have RCA jacks with wire on one end that I purchased at Radio Shack but it only has two wires and the amp has a positive a negative and a ground on each terminal?
By-pass Capacitor?
in Technical/Restorations
Posted
Thanks I had my eye on those .Is there a proper way to wire a by-pass cap with the main cap. Thanks a bunch