Quiet_Hollow
-
Posts
2477 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
Gallery
Posts posted by Quiet_Hollow
-
-
Try looking for a Kenwood VRS-N8100. It has onboard Ethernet. The Sherwood R-904N (with Ethernet but has very bright lighting) , and Newcastle R-903 are still available. Those are the only PurePath I'm aware of at that price point. Everything else is ICE power to the best of my knowledge.
I can relate...I can't belive it's this hard to find a cheap purepath receiver.
-
An analog source isn't the problem, it's the analog gain structure during playback that presents the lion share of problems. Keeping it clean, undistorted, and driver-friendly from one side of an amplifier to the other is PFM.I can only imagine how well an analog source could sound if we were to put as much time and effort into that format.
-
See Al's last bullet statement here: http://www.alkeng.com/pad.htmlNone of the people recommending against using L-pads could give a technical reason for not doing so, and electronically speaking, I can't think of one either.
You have to run the math, but it is possible to drop the damping ratio too low (less than 20) using an L-Pad if a network isn't intended for one.
-
Duplicate post
-
I never understood 4ft tall 100 lb speakers set to small, it's obvious they are not.That said ,always try different settings.
Trying different settings won't cut it flying blind. It's all in the acoustics. The real solution unfortunately is not a 4ft tall 100 lb speaker, at least in the home. But if you happen to have one and want it play well with a sub [to take advantage of the response afforded by doing so] , you have to set it to "small" to command the receiver to use it's internal filters.
-
No shame. Cinema's do it, so does proper live sound. There's good reason to do so when running a sub. Set 'em small.
-
The most realistic recording of an orchestra would use a matched pair of mics in a binaural in-the-ear arrangement (only to be played back on headphones) or a matched pair mic setup that cut the line of sight to the "virtual listener" prescribed in the Dolby arrangement for 2 channel listening. It's purely a matter of superposition. To blend more than 2 mics for a 2 channel recording will introduce a whole lot of instrumental phase problems that the mixing engineer will have to sort out. ie. Why try to mic a xylophone when the conductor has beaten the percussionist over the head enough times to make them sound just right. In fact, if you wanted to make a heck of a recording, try placing the microphones at the podium...to hear what they hear.
-
Yes, according to the literature that came with my unit.So this is a standalone item. Does this do the same thing that Audyssey has in the MultiEQ XT32? (Their newest room correction)
-
I can help you get things straightened out if you like. PM sent.
-
VERY satisfied. Once levels are set, the chirps and analysis (the hard part) are fully automatic. Set the sub delay based on the results, pick you're crossover point on the receiver and pure ****'ing magic.How satisfied are you with it?
The AS-EQ1 will suggest a crossover point for you (40Hz in my case), but you don't have to use it (I use 80 Hz, low as my receiver goes). Seeing that the passband phase response is linearized after the correction, you are free to choose a crossover point based solely on your main speaker's frequency response. You will not be disappointed.
See: http://www.billfitzmaurice.info/forum/viewtopic.php?f=6&t=12940&hilit=christmas+in+september
-
Yes, I've got one. What would you like to know?Any one with first hand eperience with this unit.
-
Hee-hee-hee [Get a DVD of The Eagles' Hell Freezes Over and listen to the bonus (audio only) track at the end. You will undoubtedly want to crank it. Then play it again, and stick your good ear in front of each speaker.
][][]
-
The amp isn't you're problem, gotta get your sub setup right if you want to be "blown away"
-
Picked up a couple more XR's (including the elusive SA-XR700) and had to put them through their paces. What better way to test them out than by dusting off my old college dorm room speakers with some Telarc and DTS at 90dB ? Just cobbled the system together to test the receivers, and didn't take the time to really dial things in. Thought I'd get my 14 year old budget-rig on video before they dry rot. They aren't Klipsch, but I was in college and got the whole system new (on clearance) for what I paid for one LaScala.
Cheers!
PS - Can't help but think the XR-700 looks kind of "McIntosh" but without the green.
-
+1I just sharted.
Getting stinky in here.
-
Yes you can. You can have so much much gain in your system that the noise floor becomes audible at the system's lowest setting. It's a real problem...and you can't turn down any further. Bigger ain't always better. Just over 20dB is plenty for the home IMHO, and if you want louder, find a more sensitive speaker.Davis and I agree you can never have too much power.
-
ROFL!Maybe Rick over at Pawn Stars will buy them out?
-
Triple check your electronics too. Start easy. One switch, knob, or wrong connection is all it takes to mess up the signal.
-
Not unless you're at the amp's limit at those quiet levels... What your asking for, more bass and a phat tone at low levels, is accomplished by using EQ or bi-amping. Put the power to the drivers that can correct for your ears at low volume.I am not asking if they can go loud as they obviously already know they can, but if more powerful amplifier will have stronger bass and more dynamic on a moderate volume level.
-
...her first Dub Step album. What does this mean?
-
@5.47???? I'm not sure what this means.
It means watch the youtube video and skip to 5:47 on the timeline. At that point in the clip there will be some male dialogue to listen to on the LaScalas. Captain Pike's voice dips well into the sub's passband during this scene.
-
Male voices should be as clean or cleaner than @ 5:47 and it's all dependent upon getting the mains and subs in phase and crossed over just right. In this case, 80Hz @ 18dB/oct
-
Modify your sub settings. Play the troublesome voice with the sub turned off. Don't forget to take into account the source either. If it's just one particular voice from a specific movie or series, it could very-well be mixed poorly. There's nothing wrong with the stock Belle's ability to cleanly resolve the male voice in of itself.
-
My Dad's 30 year old stereo...."Hi-Fi", at its loosest interpretation, didn't exsist in the household until I bought my first cassette walkman with headphones in '96.
][
Klipschorns Bleeding My Ears.
in Technical/Restorations
Posted